Burnishine Plate Sav-Ur Alkiline Plate Cleaner, Conditioner, & Scratch Remover for Traditional Analog Metal Plates (3 Sizes)
- One-step plate cleaner, conditioner, and scratch remover that works well for the large majority of metal plates.
- Odor: Chemical Odor
- Boiling Point: > 200
- Freeze Point: 20
$14.18
- 0
- 1
- 2
- 3
Overview
① Moisten a cotton pad with Plate Sav-Ur and apply to entire plate.
② Rinse plate off with fountain solution or water (note: do not allow it to dry on the plate).
③ Repeat where necessary.
① Once a week put a capful of Plate Sav-Ur in the dampener.
② Run the press for about 10 minutes and rinse with hot water.
③ Follow up with blanket or roller wash.
Specifications
| Item # | 26PTZPS-GRP |
|---|---|
| Manufacturer | Burnishine® Products |
| Manufacturer Part Number | PTZ-PSP, PTZ-PSQ, PTZ-PSG |
| Quantity | 1 Container |
| Product Type | Plate Cleaner |
| Base | Alkaline |
| Recommended Plate Type | Traditional Analog Plates |
| Flash Point | 200°F [93.3°C] |
| VOC Content | < 1% |
| HMIS Health* | 2 |
| HMIS Fire* | 1 |
| HMIS Reactivity* | 0 |
| Vapor Pressure | Not Determined |
| Compatible Plate | Universal, Metal |
| Odor | Chemical Odor |
| Odor Threshold | Not Determined |
| Boiling Point | > 200°F |
| Vapor Density | Not Determined |
| Specific Gravity (H₂0=1, at 72°F) | 1.03 |
| Freeze Point | 20°F [-6.7°C] |
| Water Solubility | 100% |
| Viscosity | Water-Like |
| Decomposition Temperature | Not Determined |
Description
Burnishine Products Plate Sav-Ur is a one-step plate cleaner, conditioner, and scratch remover that works well for the large majority of metal plates. This plate saver formula thoroughly cleans the plate surface, allowing it to accept ink more effectively, and acting as an excellent re-starter for standing metal plates. Plate Sav-Ur can also be used as a deglazer in dampening systems. It removes scratches instantly, and will also remove scum, gum streaks, and odxidation, desensitizing plates for a high-quality run and print. Burnishine plate cleaner, conditioner, and scratch remover is nonflammable and biodegradable. Always use plate saver and other plate cleaners as-directed.
Plate Sav-Ur Directions for Plates:
① Moisten a cotton pad with Plate Sav-Ur and apply to entire plate.
② Rinse plate off with fountain solution or water (note: do not allow it to dry on the plate).
③ Repeat where necessary.
Plate Sav-Ur Directions for Deglazing Dampener:
① Once a week put a capful of Plate Sav-Ur in the dampener.
② Run the press for about 10 minutes and rinse with hot water.
③ Follow up with blanket or roller wash.
Resources
Frequent Asked Questions
No. Typically those kinds of plates require an acidic cleaner, and Burnishine Plate Sav-Ur is alkaline-based. For those kinds of plates, we recommend Aqua Blue instead.
Blinding almost always occurs for one of two reasons: (1) the wrong cleaner was used, or (2) the cleaner was left on too long. Be sure your cleaner has the proper base to go with your plate, and follow the directions of the cleaner for length of time. Burnishine Plate Sav-Ur, for example, is alkaline-based, which is recommended only for traditional non-aqueous analog metal plates.
Submit a New Question
