Burnishine® Plate Sav-Ur® [1 Gallon] Item#26PTZPSG
75.5 NewCondition InStock

Burnishine® Plate Sav-Ur® [1 Gallon] Item#26PTZPSG

Item #: 26PTZPSG
Rating:
20%
FAQ: 2 Questions, 2 Answers
  • One-step plate cleaner, conditioner, and scratch remover that works well for the large majority of metal plates.
  • Odor: Chemical Odor
  • Boiling Point: > 200
  • Freeze Point: 20
Additional Sizes Below
  • 85+ Years Experience
  • Free Shipping $75+
  • Brand New
  • In Stock

$75.50

Product NameItem NumberPriceQty
Burnishine® Plate Sav-Ur® [1 Pint] Item#26PTZPSP26PTZPSP
$13.50
Burnishine® Plate Sav-Ur® [1 Quart] Item#26PTZPSQ26PTZPSQ
$20.50

Overview

Burnishine Products® Plate Sav-Ur® is a one-step plate cleaner, conditioner, and scratch remover that works well for the large majority of traditional, non-aqueous analog metal plates. This plate saver formula thoroughly cleans the plate surface, allowing it to accept ink more effectively, and acting as an excellent re-starter for standing metal plates. This plate saver can also be used as a deglazer in dampening systems. It removes scratches instantly, and will also remove scum, gum streaks, and odxidation, desensitizing plates for a high-quality run and print. Burnishine plate cleaner, conditioner, and scratch remover is nonflammable and biodegradable. Buy Burnishine Plate Sav-Ur online in either 1 pint, 1 quart, or 1 gallon size containers, each sold individually.
Directions for Plates:
   ① Moisten a cotton pad with Plate Sav-Ur and apply to entire plate.
   ② Rinse plate off with fountain solution or water (note: do not allow it to dry on the plate).
   ③ Repeat where necessary.
Directions for Deglazing Dampener:
   ① Once a week put a capful of Plate Sav-Ur in the dampener.
   ② Run the press for about 10 minutes and rinse with hot water.
   ③ Follow up with blanket or roller wash.
Note: Not recommended for aqueous analog or CTP plates.

Specifications

Item #26PTZPS-GRP
ManufacturerBurnishine® Products
Manufacturer Part NumberPTZ-PSP, PTZ-PSQ, PTZ-PSG
Quantity1 Container
Product TypePlate Cleaner
BaseAlkaline
Recommended Plate TypeTraditional Analog Plates
Flash Point200°F [93.3°C]
VOC Content< 1%
HMIS Health*2
HMIS Fire*1
HMIS Reactivity*0
Vapor PressureNot Determined
Compatible PlateUniversal, Metal
OdorChemical Odor
Odor ThresholdNot Determined
Boiling Point> 200°F
Vapor DensityNot Determined
Specific Gravity (H₂0=1, at 72°F)1.03
Freeze Point20°F [-6.7°C]
Water Solubility100%
ViscosityWater-Like
Decomposition TemperatureNot Determined

Description

Burnishine Products Plate Sav-Ur is a one-step plate cleaner, conditioner, and scratch remover that works well for the large majority of metal plates. This plate saver formula thoroughly cleans the plate surface, allowing it to accept ink more effectively, and acting as an excellent re-starter for standing metal plates. Plate Sav-Ur can also be used as a deglazer in dampening systems. It removes scratches instantly, and will also remove scum, gum streaks, and odxidation, desensitizing plates for a high-quality run and print. Burnishine plate cleaner, conditioner, and scratch remover is nonflammable and biodegradable. Always use plate saver and other plate cleaners as-directed.

Plate Sav-Ur Directions for Plates:
   ① Moisten a cotton pad with Plate Sav-Ur and apply to entire plate.
   ② Rinse plate off with fountain solution or water (note: do not allow it to dry on the plate).
   ③ Repeat where necessary.

Plate Sav-Ur Directions for Deglazing Dampener:
   ① Once a week put a capful of Plate Sav-Ur in the dampener.
   ② Run the press for about 10 minutes and rinse with hot water.
   ③ Follow up with blanket or roller wash.

Product Reviews

Rating:
20%
Write Your Own Review
You're reviewing:Burnishine Plate Sav-Ur Alkiline Plate Cleaner, Conditioner, & Scratch Remover for Traditional Analog Metal Plates (3 Sizes)
Your Rating

Frequent Asked Questions

Q
Will this work for aqueous analog and CTP plates?
Asked by Customer
A

No. Typically those kinds of plates require an acidic cleaner, and Burnishine Plate Sav-Ur is alkaline-based. For those kinds of plates, we recommend Aqua Blue instead.

Answer by Binding101
Q
Why was my image blinded (erased)?
Asked by Customer
A

Blinding almost always occurs for one of two reasons: (1) the wrong cleaner was used, or (2) the cleaner was left on too long. Be sure your cleaner has the proper base to go with your plate, and follow the directions of the cleaner for length of time. Burnishine Plate Sav-Ur, for example, is alkaline-based, which is recommended only for traditional non-aqueous analog metal plates.

Answer by Binding101

Submit a New Question