Intimus® 120 CC6 Micro Cross Cut High Security Level 6 (P-7) Paper Shredder (Discontinued)

If you have been searching for a paper shredder that will destroy even the most sensitive of documents for your large business or government office, then look no further than the 120 CC6 by Intimus® . This high security paper shredder not only meets, but exceeds the current DOD/NSA requirements for classified data destruction, rated at a level 6 security, also known as a P-7 shredder (DIN 66399 and NSA 02/01). This security level is achieved by the micro cross-cut blades that produce tiny 0.8mm x 4.5mm shredded waste.

The 120 CC6 shredder will shred through between 6 to 12 sheets of paper at a time, depending on the type of paper being shredded. It will not handle materials other than paper. With a 12 ¼" feed opening, the Intimus® 120 CC6 paper shredder can handle all of the common paper sizes using in offices and government, including letter size (8 ½" x 11"), legal size (8 ½" x 14"), tabloid size (11" x 17"), and more. It is listed to handle large office paper quantities, with approximately 5-10 daily users.

Intimus® Professional Shredder Features:
   • i-control® - Intimus® has produced a unique control panel that not only offers simple operation with just 3 buttons (power, forward, and reverse) but also an information screen that tells you when maintenance is needed. Indicator lights include paper jam, oiling required, door open, overheating, or bin overload. These indicators give you a look into the workings of the machine itself, which can help you keep it running at peak performance, and extend the life of the shredder.
   • EcoLogic - This energy-saving system will automatically place the shredder into a sleep mode when it is not used, saving energy while keeping the shredder ready-to-go, on-demand.
   • Silentec® - This is a noise-muffling technology keeps it quieter than 57 decibels, so it won't interfere with staff if placed near their offices or desks.
   • DLS Indicator - This "dynamic load sensing" feature helps prevent overloading and damage to your machine. A light runs across the feed opening and will light up green when all is well, yellow when it is slightly overloaded and you need to shred fewer sheets at a time, or red when it is overloaded to the point that a jam will occur. When red, the 120 CC6 automatically goes into reverse mode to protect your shredder.