Logan FoamWerks Channel Rail #W3001
40.71
NewCondition
InStock
Logan FoamWerks Channel Rail #W3001
Overview
The Logan FoamWerks Channel Rail #W3001 is for use with various FoamWerks tools including the WC2001 FoamWerks V-Groover and WC6001 FoamWerks Straight Cutter which can “hook” onto the W3001 Channel Rail to better guide the tool for straighter cuts. The W3001 FoamWerks Channel rail is a 32″ (81cm) aluminum rail with rubberized strips to help hold things in place and is scaled on one side with a raised edge on the other to allow some FoamWerks tools to “hook” on for use.
Specifications
| Item # | 05AGLOW3001 |
|---|---|
| Brand Name | Logan Graphic Products, Inc |
| Manufacturer Part Number | W3001 |
| Size | 32" Long |
| For Use With | Various FoamWerks tools including the WC2001 FoamWerks V-Groover and WC6001 FoamWerks Straight Cutter |
| Material | Aluminum rail with Rubberized Strips on Base |
Description
The Logan FoamWerks Channel Rail #W3001 is for use with various FoamWerks tools including the WC2001 FoamWerks V-Groover and WC6001 FoamWerks Straight Cutter which can “hook” onto the W3001 Channel Rail to better guide the tool for straighter cuts. The W3001 FoamWerks Channel rail is a 32″ (81cm) aluminum rail with rubberized strips to help hold things in place and is scaled on one side with a raised edge on the other to allow some FoamWerks tools to “hook” on for use.
Videos
FoamWerks WA-8001 Circle Cutter
Transcript:
Video: how to use the FoamWerks™ WA-8001 Circle Cutter to create perfectly cut out circles from foam and mounting boards.
Video: how to use the FoamWerks™ WA-8001 Circle Cutter to create perfectly cut out circles from foam and mounting boards.
FoamWerks WC-6010 Straight Bevel Cutter
Transcript:
Video: how to use the FoamWerks™ WC-6010 Straight/Bevel Cutter to create perfectly straight cuts and beveled angled cuts from foam and mounting boards.
Video: how to use the FoamWerks™ WC-6010 Straight/Bevel Cutter to create perfectly straight cuts and beveled angled cuts from foam and mounting boards.
FoamWerks WB-6020 Freestyle Cutter
Transcript:
Video: how to use the FoamWerks™ WB-6020 Freestyle Cutter, allowing for free movement and curves while you cut through foam and mounting boards.
Video: how to use the FoamWerks™ WB-6020 Freestyle Cutter, allowing for free movement and curves while you cut through foam and mounting boards.
Frequent Asked Questions
Q
Can the cutter be used to cut card stock approx .030 thick?
Asked by Jeff Ehrlich
A
Since this cutter is specifically designed for foam board, we cannot confirm 100%. But, given that your paper stock is thinner, we don't see a reason why it wouldn't work. Just make sure you have the proper cutting mat beneath to allow the blade to fully penetrate the sheet. https://www.binding101.com/cutters-trimmers/blades-accessories/self-healing-cutting-mats
Answer by Binding101
Q
will this cut corrugated plastic?
Asked by Gwen
A
These cutters are meant for foam core board, which tends to be quite a bit softer than corrugated plastic. Unfortunately, for that reason, we do not recommend these cutters for corrugated boards.
Answer by Binding101
Submit a New Question
