James Burn EX610D Duplex High-Speed Automatic Binding Punch
4477 121100 16

James Burn EX610D Duplex High-Speed Automatic Binding Punch

Brand: James Burn
  • 18” Feed table capacity
  • Punches 125,000 sheets per hour
  • Increase production and run all-day without down-time
  • Choose your exit reception option
  • Oversize / Truck shipping
Starting At:


Choose Below
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
Product Name Item Number Price Qty
James Burn EX610 Duplex High Speed Automatic Punch [with 2 High Pile Stackers] 04JBEX610D+04JBEX610RECP(x2)
James Burn EX610 Duplex High Speed Automatic Punch [with High Pile Stacker & Conveyor] 04JBEX610D+04JBEX610CONV+04JBEX610RECP
Double Action Die 3:1 x 4mm Square with Nail Hole for James Burn EX610 Punch 04JBEX610DA31
4:1 Round Die for EX610 320014204 for James Burn EX610 Punch 04JBEX61041R
3:1 Round Hole Die with Thumb Cut for James Burn EX610 Punch 04JBEX61031RT
3:1 Pitch, 6.5mm x 5.5mm Oval Die for James Burn EX610 Punch 04JBEX61031OV
2:1 Pitch 6mm Round Hole Die for James Burn EX610 Punch 04JBEX61021R
Wire-O® 3:1 EX610 Die [4mm Round Holes] Item#04JBEX61031R 04JBEX61031R
Spiral Binding Coil 4:1 EX610 Die [5x4mm Oval Holes (0.250)] Item#04JBEX61041OV 04JBEX61041OV
Spiral Binding Coil 4:1 EX610 Die [4.75mm Round Holes (0.248)] Item#04JBEX610248R 04JBEX610248R
Wire-O® 3:1 EX610 Die [Square Holes] Item#04JBEX61031S 04JBEX61031S
Spiral Binding Coil 4:1 EX610 Die [5x4mm Oval Holes (0.2475)] Item#04JBEX6102475 04JBEX6102475
Wire-O® 2:1 EX610 Die [Square Holes] Item#04JBEX61021S 04JBEX61021S
Plastic Comb EX610 Die [8x3mm Rectangular Holes] Item#04JBEX610PB 04JBEX610PB
Spiral Binding Coil 4:1 EX610 Die [5x4mm Oval Holes (0.248)] Item#04JBEX610OVL 04JBEX610OVL
Wire-O® 3:1 EX610 Die [with Thumb Cut Hole] Item#04JBEX61031ST 04JBEX61031ST


With the EX610 Duplex automatic binding punch machine, you get the same speed, efficiency, and quality-product output as the standard EX610 and EX610DA punches, but with the added ability to be able to punch cardboard sheets up to 2.5 mm thick. You can choose to buy the EX610 Duplex in two different configurations: either with one pile high stacker and one conveyor, or with two pile high stackers. This unique exit option is the only one on the market, and allows you to produce punched paper and punched cardboard sheets in the same pass, with two separate reception options. Add the optional tab pusher to allow for also punching index tabs, and the board feeder option for easier board loading. A nail hole punching kit can also be added, to allow for punching of the nail hole for wall-hanging calendars. However you choose to use your high speed punching machine, you can rest easy knowing that you have the fastest and highest quality binding punch in it's class. Pair with any of the number of punching dies available to allow for versatility to punch for Wire-O®, plastic coil spiral binding, plastic comb, and many more.
If you are ready for a quote, call us at (866) 537-2244 or email info@buy101.com and we will connect you to our dedicated team of James Burn experts.


Item # 04JBEX610D-GRP
Manufacturer James Burn
Suggested User Industrial
Operation: Punching Electric
Compatible Supplies & Accessories EX610 Series Punching Dies
EX610 Series Tab Pusher (Item# 04JBEX610TABP)
EX610 Series Nail Hole Punching Kit (Item# 04JBEXNHPK)
EX610 Series Bottom Feed Board Unit (Item# 04JBEX610BF)
Power Voltage 220/380v Three Phase 60 Hz (20A) 3Kw
Dimensions 110" W x 40" D x 54" H
Setup Time 15-20 Minutes, Depending on Operator
Die Change Time Less than 2 Minutes
Paper Size 4-1/4" x 3-7/8" up to 24" x 20-3/4"
Accepted Paper Type No Stock Limitations
Feed Table Capacity 18" Thick Stack
Selectable Speeds Adjustable with Hand Wheel (30 Cycles / Min to 120 Cycles / Min)
Speed* Up to 125,000 Sheets per Hour
Sheet Pickup Top of Pile Positive Sheet Pickup
Maximum Punching Thickness 2.5 mm
Pick Thickness Up to 2.5 mm
Air Compressor Requirements 2 CFM at 40 PSI
Control Panel No Control Panel
Jogger 4-Sided Jogger
Disengageable Die Pins Yes (For Common Paper Sizes, Varies by Die)
Die / Tool Storage No Die Storage On-Unit
Hands-Free Operation Yes
Monthly Volume / Duty Rating Continuous Use (Monthly Volume Dependent on Operator and Shifts)
Special Training Required Minimal Training Required
Product Weight (lbs) 3155
Shipping Weight (lbs) 3479


With the James Burn EX610D "Duplex" automatic binding punch, you can punch both mixed stock sheets and cardboards up to 2.5 mm thick, without having to run them separately. It comes with two exit reception options: either a pair of pile high stackers, or one high pile stacker and one conveyor. The pile high stacker will collect the chipboard sheets, while the other stacker or conveyor collects your standard punched paper. The main difference inside the machine is that the chipboard does not go around the turnover device and must exit through the stacker. The pile high stackers have rolling castors, so they are easily moved to the binding station of your choice (consider the BB50H wire binder or the CB30QS automatic coil inserter). The conveyor creates a shingled stack for easy grabbing and binding of sets.

With the James Burn EX610 Duplex punch, you will increase your production speed to unheard of variable running speeds up to 125,000 sheets per hour*. The speed is adjusted with a hand crank for micro adjustment capabilities, and cycle speeds from 30 to 120 cycles per minute*. This allows for unique customization that can be tailored to both your individual operator, as well as the specific job requirements. A unique air assist beak sheet grabber helps separate the pages as it grabs them, making it easy to work with even statically-charged pages.

The EX610 Duplex is an ideal machine for large print shops and binderies that require high speed, quick changeovers between jobs, little manpower, and perfectly punched pages to impress clients of all sizes and kinds; including those that purchase calendars. It will help these users achieve unheard of production levels with minimal training for the operator.

The EX610 Duplex is rated for continued use, meaning there is no down time required for a full workday. The unique feed table holds up to a 18" thick stack of paper, and the movable trays allow you to set up one full stack to be punched, and, as it runs, another stack to be setup to take its place as soon as it is complete. The paper stock travels through the machine automatically, being pulled by the most advanced technology in the industry and jogged for perfect punch registration with a unique 4-sided inner jogger. Two different picking beaks are included with your machine, including the standard beak and the separator beak for thicker and more unique stocks. If you want the speed and volume allowance of the EX610D, but don't need the board punching and double-exit, then consider the standard EX610 machine, or the EX610DA double-action punch as alternatives.

EX610DA Punching Dies Available:

Click here to shop the variety of EX610DA punching dies available. or ask about custom-manufactured dies for more unique punching patterns.
   • Spiral Binding / Plastic Coil
   • Wire-O® Twin-Loop Wire Bindings
   • Plastic Comb
   • Velo Binding
   • Three-Hole for Ring Binders
   • Custom dies made to your exact specifications

EX610DA Optional Accessories:

   • Tab Pushing Device - Allows for punching of index tab dividers with a tab shoulder of 1/4"** (Item# 04JBEX610TABP)
   • Nail Hole Punch Kit - Allows the machine to punch a nail hole for wall hanging calendars (Item# 04JBEXNHPK)
   • Bottom Feed Board Unit - Assists punching of cardboard sheets (Item# 04JBEX610BF)

EX610DA Benefits and Features:

   • Hands-free operation allows you to load the paper, setup the job, press start, and walk away
   • Adjustable cycle speeds with crank wheel, up to 8,400 cycles per hour*
   • Punching speeds up to 125,000 sheets per hour* with perfectly clean holes for finishing
   • There is minimal training required for your operators
   • Punches a wide variety of paper stocks, covers, and tabbed sheets from 4 ¼" x 3 ⅞" up to 24" x 20 ¾"
   • Picking thickness allows for sheets up to 2.5mm thick for various paper stocks and card boards
   • Turnover drum keeps stacks of paper stock perfectly collated
   • Positive sheet pickup with beak and air-assist (air compressor not included) ensures perfect registration of your pages for perfectly finished punched pages, even paper stocks prone to static
   • All operations and adjustments are simple and quick-to-perform, including die changes


*May vary depending on sheet size, paper stock, operator, and other factors.
**Tabs cannot be run while in double action mode

Product Reviews

Write Your Own Review
You're reviewing:James Burn EX610D Duplex High-Speed Automatic Binding Punch
Your Rating

Frequent Asked Questions

Submit a New Question