12" Coil Adapter Kit for 8-1/2" Binding Edge
104.25 NewCondition InStock

12" Coil Adapter Kit for 8-1/2" Binding Edge

Item #: 05GW200849
Brand: James Burn
FAQ: 1 Questions, 1 Answers
  • Speed: Up to 600 Books per Hour
  • Compatible Coils: 8 to 20 mm Plastic Coils (up to 30mm with large coil kit)
  • Paper Size: 5"-12" or 17" Binding Edge (Depending on Model)
  • Choose from 12" or 17" models
Additional Sizes Below
  • 85+ Years Experience
  • Brand New

$104.25

Product Name Item Number Price Qty
James Burn CB30QS 17" Automatic Coil Inserter 04JBCB30QS17
$35,250.00
Optional 6mm & 7mm Crimping Head Kit for 12" CB30QS 04JBCB30QSKIT
$1,620.00
3:1 Pitch Large Diameter Kit for 12" CB30-QS Inserter (6.5 x 5.5mm Oval Holes for 22-30mm) 04JBCB30LDK12
$4,520.00
3:1 Pitch Large Diameter Kit for 17" CB30-QS Inserter (6.5 x 5.5mm Oval Holes for 22-30mm) 04JBCB30LDK17
$5,425.00
James Burn CB30QS 12" Automatic Coil Inserter 04JBCB30QS
$31,065.00
2.5:1 Pitch Large Diameter Kit for 12" CB30QS 04JBCB30LDK12251
$5,235.00

Overview

Say goodbye to hand cutting of coils with the 12" Coil Adapter Kit for 8-1/2" Binding Edge. This accessory is for use with 8 ½" sheets and 12" pre-cut coils. It supports the extra coil on the right side of the book so the cut/bend head can grab it to properly finish the book. Make binding fast and efficient with these optional accessories.

Specifications

Item # 05GW200849
Quantity 1
Shipping Weight (lbs) 1

Description

Say goodbye to hand cutting of coils with the 12" Coil Adapter Kit for 8-1/2" Binding Edge. This accessory is for use with 8 ½" sheets and 12" pre-cut coils. It supports the extra coil on the right side of the book so the cut/bend head can grab it to properly finish the book. Make binding fast and efficient with these optional accessories.

Product Reviews

Write Your Own Review
You're reviewing:James Burn CB30QS Automatic Coil Inserter & Crimper
Your Rating

Frequent Asked Questions

Q
where do you plug in the air hose?
Asked by Ann Mckeown
A
The airline is plugged into the air inlet on the side of the machine. It is best to put a male quick disconnect into the treads on the inlet. The airline coming from the compressor will want to have the female disconnect on it so it can be attached to the male on the machine. These quick disconnects allow the line to be easily taken on or off as needed.
Answer by Binding101

Submit a New Question

Request Code