Burnishine® Plate Care™ Preserver, Finisher, & Cleaner [Quart]
① Shake bottle well before using.
② Apply generous amount with a cotton pad, cheesecloth, or damp sponge and spread evenly over plate.
③ Repeat where necessary.
④ Buff dry and store.
|Manufacturer Part Number||PTZ-PCQ|
|Product Type||Plate Cleaner|
|Flash Point||120°F [48.9°C]|
|VOC Content||0.99 lbs/gal [119 g/l]|
|Vapor Pressure||Not Determined|
|Compatible Plate||Universal, Metal|
|Odor||Slight Chemical Odor|
|Odor Threshold||Not Determined|
|Boiling Point||212°F [100°C]|
|Vapor Density||Not Determined|
|Specific Gravity (H₂0=1, at 72°F)||0.99|
|Freeze Point||20°F [-6.7°C]|
|Viscosity||72°F [SP#4 at 10rpm, 6000-11000 cps]|
|Decomposition Temperature||Not Determined|
|Shipping Weight (lbs)||3.3|
Burnishine® Plate Care™ is a one-step preserver, finisher, and cleaner for any metal lithographic plate. It even works with CTP, thermal, and violet plates. Plate Care™ will thoroughly clean and finish your offset printing plate surface, offering superior protection from oxidation during storage, and will save plates for up to a year when stored properly. It is also often used to clean plates on the press. Removing Plate Care™ from the plate is simple; just wipe the plate with a damp sponge or soft cloth. Sold in a 1 quart container.
Plate Care™ Directions:
① Shake the bottle well before using to properly mix the ingredients.
② Apply a generous amount of Plate Care™ to your plate with a cotton pad, cheesecloth, or damp sponge, and spread evenly over the entire plate surface.
③ Repeat process if necessary.
④ Buff the plate dry, and store.