PAL-M Piks-A-Lift Manual Paper Picker

Welcome to Rhin-O-Tuff. This video looks for the Onyx PAL-M, a pixel lift manual module. The PAL-M is part of the Onyx semi automated module series, a manual paper separator used to optimize the amount of paper to be inserted into the paper punch each time, a simple adjustment to the paper style allows you to use any size paper, load a small packet of paper that you'll be using onto the tabletop and land up with the back pole right in the center, and then lock the setting into place. At this point, you can load the rest of your paper on top. It can handle up three rings with or without tabs. Stop at the machine. Use a small catch, release. It brings down the apparatus and rests on top of the paper. Make adjustments with this dial to determine your lift thickness. The actual motion is simple, done with the thumb. Press the ball back. It comes forward and lifts your packet. Continue to lift and punch and lift and punch until your project is done. If you need to make an adjustment to the packets at any point, to the sticker or thinner, simply turn a dial up or down until you have the perfect amount for your punching device. If you have a lot of binding to do, you can be assured of no more paper jams or inefficient punches with a PAL-M. The PAL-M can be used right out of the box, in the standalone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch. It can also be mounted to the ape system for greater efficiency. That's the Onyx PAL-M up its lift manual module. The Rhin-O-Tuff Onyx line.