We process your personal information to measure and improve our sites and service, to assist our marketing campaigns and to provide personalized content and advertising. By clicking the button on the right, you can exercise your privacy rights. For more information see our privacy notice.
Privacy Policy
Mounting Frame "L" Shaped Alignment Tool
36.19
NewCondition
OutOfStock
Mounting Frame "L" Shaped Alignment Tool
We're sorry, but we no longer sell this item.
Below are a few alternative options that may be a great fit for your needs.
If not, please call us at (866) 537-2244 for personalized recommendations.
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
- 4
Overview
This acrylic alignment tool is shaped like a capital "L" to help you perfectly align your photos to your Silver Lining photo blocks from both ends.
Specifications
| Item # | 88MOUNTALIGN |
|---|---|
| Manufacturer | Spiral |
| Manufacturer Part Number | Q8945A |
| UPC Code | 858237005226 |
| Brand Name | Silver Linings™ |
| Recommended Accessories | Photo Blocks |
| Color | Clear |
| Shipping Weight | 1 lb. |
Description
This acrylic alignment tool is shaped like a capital "L" to help you perfectly align your photos to your Silver Lining photo blocks from both ends.
Videos
How To Strengthen a Large GOframe Using a Centre Brace Bar
Transcript:
GOframe is a quick and simple canvas stretching solution. Individual or multiple Centre Brace Bars can be used to strengthen large canvas sizes by installing specially developed joining clips during stretching.
GOframe is a quick and simple canvas stretching solution. Individual or multiple Centre Brace Bars can be used to strengthen large canvas sizes by installing specially developed joining clips during stretching.
How to make a GOframe 1500 Pro Bar stretched canvas (using glue)
Transcript:
To begin, gather all the components you need. Your print on canvas, GOframe 1500 Pro Bars in the correct length for your finished frame, a set of GOframe Pro Bar Corners, some corner pins and tensioning inserts, a cutting tool and a bottle of archival quality glue.
Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners using the built-in notches and grooves to ensure each bar lays flat.
Place your prin... Read More
Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners using the built-in notches and grooves to ensure each bar lays flat.
Place your prin... Read More
To begin, gather all the components you need. Your print on canvas, GOframe 1500 Pro Bars in the correct length for your finished frame, a set of GOframe Pro Bar Corners, some corner pins and tensioning inserts, a cutting tool and a bottle of archival quality glue.
Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners using the built-in notches and grooves to ensure each bar lays flat.
Place your print face down on your clean work surface. Then position your frame face down on top. The notches around the edge of the corner clamps can be used as a guide to ensure the frame is centered.
Once you are happy with the position of your frame, apply pressure to each of the bars to secure it to the back of your canvas.
Remove the GOframe 1500 Pro Bar Corners and store them in a safe place for future use.
Trim around the edges to remove the excess canvas using the wooden bars as a guide to ensure your cut is straight. Then trim diagonally across each corner. Cut into each corner at a 45-degree angle to create corner tabs. These will give a clear corner finish on your stretched canvas frame.
Gently lift each bar and apply a thin bead of glue down the length between the bar and the canvas. If too much glue is applied, simply wipe away the excess with a clean cloth before continuing.
Fold up each corner tab and apply pressure to secure them to each bar. To create the edges of your finished canvas, lift the bars so that the corners meet. Using the pre-drilled holes in each bar, insert the corner pins to hold the bars in-place.
Finish stretching your canvas with the tensioning inserts. Simply align each insert with the grooves on the back of each bar, then apply pressure to secure in-place.
Your frame is now finished. But if you desire a cleaner finish on the back, the narrower piece f tape on the top of each bar can be removed.
Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners using the built-in notches and grooves to ensure each bar lays flat.
Place your print face down on your clean work surface. Then position your frame face down on top. The notches around the edge of the corner clamps can be used as a guide to ensure the frame is centered.
Once you are happy with the position of your frame, apply pressure to each of the bars to secure it to the back of your canvas.
Remove the GOframe 1500 Pro Bar Corners and store them in a safe place for future use.
Trim around the edges to remove the excess canvas using the wooden bars as a guide to ensure your cut is straight. Then trim diagonally across each corner. Cut into each corner at a 45-degree angle to create corner tabs. These will give a clear corner finish on your stretched canvas frame.
Gently lift each bar and apply a thin bead of glue down the length between the bar and the canvas. If too much glue is applied, simply wipe away the excess with a clean cloth before continuing.
Fold up each corner tab and apply pressure to secure them to each bar. To create the edges of your finished canvas, lift the bars so that the corners meet. Using the pre-drilled holes in each bar, insert the corner pins to hold the bars in-place.
Finish stretching your canvas with the tensioning inserts. Simply align each insert with the grooves on the back of each bar, then apply pressure to secure in-place.
Your frame is now finished. But if you desire a cleaner finish on the back, the narrower piece f tape on the top of each bar can be removed.
Frequent Asked Questions
Q
How do I make them?
Asked by Customer
A
Making a professional-quality photo mounted block is simple with our Silver Linings blocks and variety of accessories. You can download the full Silver Linings™ instructions here.
Answer by Binding101
Submit a New Question
