Drytac MediaShield Emerytex UV Clear Overlaminating Film [5mil,51" x 328', Matte Pebble Textured Finish]
![Drytac MediaShield Emerytex UV Clear Overlaminating Film [5mil,51" x 328', Matte Pebble Textured Finish]](https://www.binding101.com/media/catalog/product/cache/4806281b0b4d25b598359cb75ace4a3c/i/n/interlam-ecotex-6-6mil-51-inch-x-328-ps-overlaminate-lg1.jpg)
- 0
- 1
Overview
Designed for indoor use, the Drytac MediaShield Emerytex Matte Pebble Textured 5mil 51" x 328' UV Low Temp Overlaminating Film is a clear PVC laminating film with a matte pebble textured finish. It's a plasticized, embossed, and UV stabilized film. The film is coated on one side with a heat activated solvent acrylic adhesive, protected by Kraft release paper that is siliconized on the release side and PE-coated on the other. It is recommended for laminating prints that will be placed in high traffic indoor display area. It is recommended for laminating prints that will be placed in high-traffic indoor display areas. The film was also subjected to testing in accordance with DIN 51130 and received an R11 rating for its anti-slip properties.
Specifications
| Item # | 80DTET51328 |
|---|---|
| Manufacturer | Drytac |
| Manufacturer Item # | ET51328 |
| Brand | Drytac |
| Film Width | 51" |
| Film Length | 328' |
| Film Thickness | 6.6mil |
| Core Size | 3" |
| Finish | EcoTex (Pebble Textured) |
| Base Film | 5.6mil polypropylene |
| Adhesive | 1.0mil aqueous acrylic |
| Initial Tack | High |
| Application Speed | 1' - 6' per minute |
| Application Temperature | Room Temperature - 120 F |
| Release Liner | Moisture Stable Paper (70gsm) |
Description
Designed for indoor use, the Drytac MediaShield Emerytex Matte Pebble Textured 5mil 51" x 328' UV Low Temp Overlaminating Film is a clear PVC laminating film with a matte pebble textured finish. It's a plasticized, embossed, and UV stabilized film. The film is coated on one side with a heat activated solvent acrylic adhesive, protected by Kraft release paper that is siliconized on the release side and PE-coated on the other. It is recommended for laminating prints that will be placed in high traffic indoor display area. It is recommended for laminating prints that will be placed in high-traffic indoor display areas. The film was also subjected to testing in accordance with DIN 51130 and received an R11 rating for its anti-slip properties.
Product Reviews
Technical Data
Typical Applications
- The scuff -resistant, pebble textured finish makes this laminating film suitable for graphics where extensive handling may be involved.
- Ideal for laminating and encapsulating tradeshow and banner stand graphics, signage in high traffi c areas, counter mats, placemats, and other graphics where a scuff -resistant finish is required and cost is a key factor.
- Ideal for single-sided lamination due to its dimensional stability.
- Offers excellent UV protection for high quality images, photographic prints, wallcoverings, and self-adhesive vinyl.
Product Structure
| Film | Pebble Textured PP |
|---|---|
| Adhesive | Aqueous Acrylic (Pressure Sensitive) |
| Release Liner | Siliconized 1 Side PE Coated Kraft |
Physical Characteristics
| Film Thickness | 5.6 mil (140µ) |
|---|---|
| Adhesive Layer | 1 mil (25µ) |
| Film/Adhesive Ratio | 5.6:1 |
| UV Protection Factor | Adhesive contains UV stabilizers, which prevent fi lm degradation and provide UV protection to the underlying image |
| Outdoor Durability | Not Applicable |
| Service Temperature Range | -4°F to 248°F (-20°C to 120°C) |
| Peel Strength (20 min, FTM1) | 11 N/25mm |
| Shelf Life | Use within 1 year after opening original box |
| Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Process Settings
| Equipment Type | Temperature | Speed |
|---|---|---|
| Roller Laminator | Room temperature to 104°F (40°C) | 1 ft to 8 ft (0.3m to 2.5m) per minute |
| Press | Not recommended | |
Frequent Asked Questions
Submit a New Question
