1/2" Dot Shot Pro Refill [High Profile, Super High Tack] (400 Dots / Roll) Item#06GLUDSP43404

These Glue Dots®  Refill Rolls are compatible with the Dot Shot Pro hand-held adhesive applicator. Dot Shot Pro Refills are available in different profiles, including low profile, medium profile, or high profile. Different profiles allow you to get different viewing goals, allowing for different presentation options for all of your products. Make your items pop out from the page with thicker profiles, or keep them tight for mailing with the low profile dots. Low profile dots range from 12 to 20 mils thick, medium profile dots range from 35 to 55 mils and high profile dots range from 80 to 100 mils (hint: 1 mil = 1/1000").

Once you choose your Dot Shot Pro profile, choose a tack level that is right for your application. Low Tack Glue Dots® are removable on nearly all surfaces, Medium Tack Glue Dots® are removable from most substrates. Low and medium tack Glue Dots® contain some oil, so we recommend testing absorbent surfaces for staining. Looking for something stronger? Consider High Tack Glue Dots® to create a semi-permanent bond that will last through handling, or Super High Tack Glue Dots® to create a permanent bond, which will tear paper when removed.

The Glue Dots® MatrX™ style products feature a continuous pattern of pressure sensitive adhesive micro-dots. MatrX™ Glue Dots® offer a cleaner solution to traditional glue transfer and double sided tapes. Large MatrX™ Adhesives are approximately 10-15 mils thick. Each roll contains 20 yards of the continuous pattern. MatrX™ Adhesives offer instant bonding, a clean cut-off, no residue and less waste than traditional double-sided adhesives. Available in either a 1/4" or 1/2" wide strip, and in either permanent or removable tack levels.