Boss Black Vinyl Hospitality Task Chair - B9533C-BK

This task chair in black vinyl is designed with fixed chrome arms for that pop of metallic color that brings any room or office to the next level. The chair comes with a tilt lock feature. Simply pull the handle out to allow the chair to tilt, push the handle in to lock the chair in the upright position. The tension control knob, adjust the tension of the tilt. The pneumatic adjustable gas lift allows for easy seat height adjustment to help you find the personalized sitting style that suits you and your work environment.

Before beginning assembly of your office chair, make sure you have all your parts and hardware. Starting with the base and casters, begin by flipping the base upside down, then firmly press in each caster until you hear a click. Flip the base to the upright position. Firmly insert the gas lift into the base. Next, locate your seat cushion. The arrow on the mechanism indicates the front of the chair. Using the included M8-22 mechanism screws, hand thread the screws to connect your mechanism to the bottom of your seat cushion. With a Phillips screwdriver, firmly tighten each screw in an alternating cross fashion. Place the seat cushion upside down on top of the backrest as shown here. Start by connecting one armrest to your back rest. Do not fully tighten the screws at this point. Then connect the armrest to the seat cushion. Flip the chair over and repeat the process to attach the second arm. Do not fully tighten the screws at this point. Place the seat cushion into the upright position. Secure the backrest onto the seat cushion with L bar screws. Firmly place your sheet onto the gas lift. Now, firmly tighten all your screws gradually, in an alternating pattern. Firmly press the arm caps into the screw holes. Your final step of assembly is to sit on your new chair to firmly engage the mechanism onto the gas lift. You're now ready to enjoy your new office chair.