Self-Wound Liner less PSA Laminating Film [1.8 Mil, PET, 54" X 300', 3" Core, Gloss]

The Self-Wound Liner less PSA Laminating Film [1.8 Mil, PET, 54" x 300', 3" Core, Gloss] is made of sturdy polyester and has optically clear pressure sensitive adhesive. This 1.8 mil thick, 54" x 300' laminating film is made to withstand application temperatures between 40°F and 176°F and is intended for use with laminators that run between 95 and 105°F (35 and 41°C). The printed image can be seen clearly and without distortion thanks to the adhesive's strong bonding and transparency. This pressure-sensitive adhesive (PSA) self-wound liner-less film works with solvent, eco-solvent, latex-based, and UV ink jet prints. Because it can be applied to both flexible and rigid substrates, you have flexibility in the materials you select for your signage. The film's gloss finish enhances the printed image's color, depth, and vibrancy while protecting it, making the signage more aesthetically pleasing as a whole. The proper drying, curing, and outgassing of the ink used in the printing process determine how long the laminate will last.

Features:

• Lower cost than conventional lamination films as you are not paying for the throw away release material
• Up to five-year outdoor durability – vertical exposure
• Compatible with vinyl media
• Less environmental impact
• Available in Gloss and Matt (Satin Look) surface finish
• Less webbing time required when used on your laminator, no release to take-up
• Compatible with Solvent, Eco-Solvent, Latex and UV inkjet
• Can be applied cold or with top laminator heat assist
• Because the material has a Polyester base it is very dimensionally stable
• Can be applied with faster laminator speeds
• Unique to the market
• Improvements:
  • No air bubbles in the stock rolls of laminate
  • No fisheyes when laminate is applied to the printed media
  • Low noise unwind