When you buy the corner staplers for the MBM FC 10 automatic collator online, you are adding the ability to not only collate your sprinted sheets into sets, but to staple them together too, essentially eliminating a normally manual step in the print-finishing process. This add-on machine also works when you use the FC 10 Twin Tower System. Once you have your corner stapler and collator system, simply connect the unit and use the user-friendly controls to set up your job to include the stapling function. The staple cartridges have a 5,000 staple capacity, so cartridge change-out is infrequent. There is a dust trapper waste bin at the back of the stapler so you can easily empty the paper scraps as needed. There is a stapling position lever that lets you set your staple for one of four settings, depending on the paper size (some sizes staple horizontally on the top right corner, and others staple vertically on the top corner). Some daily maintenance is needed to keep the FC 10 stapler working at tits full potential, so be sure to check out the user manual for information on what is needed.
Note: if you are using the FC 10 Stand for your collators themselves, you will need to also invest in the corner stapler stand to ensure the height is leveled with the machine.