Drytac MHL Matte UV Low Temp Thermal Laminating Film [3mil, 51" x 500']

Item #: 80DTMM51503

Brand: Drytac

Film Finish: Matte
Core Size: 3"
Film Thickness: 3.0mil
Hot or Cold: Hot

85+ Years Experience
Free Shipping $75+
Brand New

$557.33

Qty

Buy Now, Pay Later
Starting at $52/monthLearn More >

Skip to the end of the images gallery

Skip to the beginning of the images gallery

SWIPE FOR MORE IMAGES

Overview

Specifications

Item #	80DTMM51503
Manufacturer	Drytac
Manufacturer Item #	MM51503
Brand	Drytac
Film Width	51"
Film Length	500'
Film Thickness	3.0mil
Core Size	3"
Finish	Matte
Base Film	0.5mil (13 micron) polyester
Adhesive	2.5 mil (62 micron) co-extruded polyethylene copolymer
Initial Tack	None
Application Speed	1' - 10' per minute
Application Temperature	190 F - 220 F
Release Liner	None

Description

Offering superior quality and lower melting temperatures, theDrytac MHL Matte UV 3mil 51" x 500' Low Temp Thermal Laminating Film is the best choice for encapsulating xerographic and inkjet-bond output. It is co-extruded for a carefully balanced ratio of polyester film to adhesive. Its adhesive is designed to activate between 190 and 220 degrees Fahrenheit. To minimise photo fading and prevent moisture exposure, this overlaminate has been specially designed with UV inhibitors and has a matte finish. The low sealing temperature prevents ink in digital print graphics from deterioration, at high temperatures.

Features:

Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators.
Co-extruded for a carefully balanced ratio of polyester film to adhesive.
Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications.
Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Incorporate UV absorbers for excellent protection from damaging UV rays.

Product Reviews

Write Your Own Review

You're reviewing:Drytac MHL Matte UV Low Temp Thermal Laminating Film [3mil, 51" x 500']

Your Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Summary

Review

Tips and Technical Data

Tips For Applying MHL UV Thermal Films:

Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
Co-extruded for a carefully balanced ratio of polyester film to adhesive.
Use your idler bar to increase the area of contact between the heated rollers and the film.
To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

Technical Data

MHL Low Temperature Matte is a 3 mil (75µ) high clarity, abrasion-resistant PET thermal laminating film with a low melt-point adhesive designed for high-speed single- and double-sided lamination. It off ers excellent glare reduction. The film is resistant to water, oil, acid, and alkali and can be die cut.

Typical Applications

Ideal for tradeshow graphics.
Suitable for a wide variety of POP displays.

Physical Characteristics

Film Thickness	3 mil (75µ)
Film/Adhesive Ratio	0.5:2.5
Processing Temperature	185°F to 195°F (85°C to 91°C)
Shelf Life	Use within 1 year after opening original box
Storage Conditions	59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity