We process your personal information to measure and improve our sites and service, to assist our marketing campaigns and to provide personalized content and advertising. By clicking the button on the right, you can exercise your privacy rights. For more information see our privacy notice.
Privacy Policy
Drytac MHA Multi Heat Activated Mounting Adhesives
469.05
938.1
4
Drytac MHA Multi Heat Activated Mounting Adhesives
Brand:
Drytac
- 5 popular roll widths
- 328' roll length
- Moisture stable release paper
- Activates between 185 - 220 degrees F
- Free Shipping $150+
Starting At:
$469.05
Choose Below
SWIPE FOR MORE IMAGES
- 0
- 1
Overview
Drytac MHA Multi Heat Activated Mounting Adhesive is a heat-activated mounting adhesive with very low initial tack that allows users to reposition prints without damage. A moisture-stable release liner helps the media lay flat. It is a popular choice for thinner materials such as graphic renderings, drawings, blueprints, color copies, courtroom displays, etc.
Specifications
| Item # | 80DTMHA-GRP |
|---|---|
| Manufacturer | Drytac |
| Film Width | 25.5" |
| Film Length | 328' |
| Core Size | 3" |
| Filmic Carrier | None |
| Adhesive Bond | Permanent |
| Initial Tack | Very Low |
| Application Speed | 1' - 8' (0.3m - 2.5m) per minute |
| Adhesive Base | Solvent acrylic heat-activated |
| App. Temperature | 185 F - 220 F |
| Release Liner | Moisture Stable Paper (100 gsm) |
Description
Drytac MHA Multi Heat Activated Mounting Adhesive is a heat-activated mounting adhesive with very low initial tack that allows users to reposition prints without damage. A moisture-stable release liner helps the media lay flat. It is a popular choice for thinner materials such as graphic renderings, drawings, blueprints, color copies, courtroom displays, etc. Once processed through a heated roll laminator at 185 F - 220 F / 85 C - 140 C, the adhesive instantly becomes a permanent bond. These features make MHA an economical solution for flexible and rollable substrates such as expanded PVC graphic materials like Sintra.
Features:
- When Mounting thicker prints/ output it is recommended to increase the temperature of the heated laminator rollers to a minimum of 200 F while reducing laminator feed speed to ensure sufficient heat permeates through the print image, board and (optional) overlaminating film to activate the MHA adhesive
- We do not recommend using the laminator's idler bar when applying MHA
- MHA only works on heated roller laminators, not hot-shoe style laminators
Product Reviews
Write Your Own Review
Frequent Asked Questions
Submit a New Question
