Plain Uncollated Copier Tabs
- Made of a 90# white index stock.
- Built to be compatible with a variety of high-speed copiers including the DocuTech and Xerox DocuColor series printers.
- Unprinted Tabs.
- Orientation: Side Tab
Starting at: $17.49
• Choose Unpunched or 3-Hole for Binders
With our selection of copier tab dividers, you can print your own index tabs on demand. Sometimes called Xerox tabs, these dividers are made of a 90# white index stock that is designed to run through a variety of different high speed copiers including the DocuTech and Xerox DocuColor series printers; just check your user manual for compatibility. Our copier tabs offer the highest quality so you can count on them to feed, print and run through your equipment smoothly while providing you with the professional look that your office requires.
Plain copier tabs are made of a plain heavy duty index stock and don't feature any additional coating.
The 5th cut indicates how many tabs are visible along the edge when the set is assembled; so a 1/5 cut shows 5 tabs side by side.
Uncollated refers to the order of the tabs, meaning that you buy them based on the position of the tab, or where it is located. You can choose from position 1 (which also flips to make position 5), position 2 (which flips to also make position 4), or position 3 (which is centered on the sheet).
Expert Product Review: Copier Tabs by Mallory Morsa
Hi everyone! My name is Mallory Morsa, and I am the product expert at Binding101. I have been a part of the Binding101 team since 2008, where I started out in service and sales, learning our customers' needs and how to offer truly exceptional service. After a of couple years, I moved into a role of product management that required in-depth product research, as well as training of our staff. And in my honest expert reviews, I am proud to share that extensive knowledge with you. Take a look at the product review below, which will highlight both the pros and the cons, as well as identify the ideal customer. If you have any questions or need more information, please call our customer care team at (866)537-2244. Thank you for stopping by, and please check out our Binding101 social media channels by clicking the icons above.
Copier tabs are most popular with businesses that need to print their own tabs in-house, however, are also used by individuals who want to print or write-on their tabs. Want ideas for fun and professional index tabs? Check out our Index Tabs Pinterest Board.
COPIER TAB BENEFITS:
The first and most notable perk of our copier tabs is the ability to customize them to suit your exact needs, without having to meet the custom tab divider minimum order requirements or wait for production times. You can print them on-demand, and in whatever quantity you need for your specific project. Side note: we can also make high quality custom tabs for you with just a 50 set minimum, if you prefer those to printing your own!
Another benefit is that there is a diverse selection of options that you can choose from. You may think “but aren’t these just plain paper tabs, how diverse can they really be?” Very!
① First, you can choose the tab cut from 6 different options. Tab cut refers to the tab width, and how many tabs can fit onto the sheet edge (also sometimes called "tabs per bank"). They are indicated via a fraction; for example, a 1/3 cut (one third) tab can fit 3 visible tabs along the edge without overlap, with each tab measuring about 3 ⁵/₁₆” wide (they stick out 1/2", so are all 1/2" tall).
② Once you know the proper cut for you, you can choose from the tab collation. Collation refers to the order of the tabs, and there are 3 different options: straight collated that are in 1-2-3 order, reverse collated that are in 3-2-1 order, and uncollated, where every tab is in just 1 position (so for comparison purposes, in 1-1-1 order, or 2-2-2 order, etc.). When a tab set is uncollated, you have to choose the position you want, and for all tabs except the center tab, the position contains two options. For example, position 1 flipped over is the same as position 5. Still a little confused? I don’t blame you! These photos of 1/5 cut tabs will help clarify index tab collation:
③ You can also choose whether or not to have a Mylar coating on the tab extension. This clear gloss coating adds extra durability to help prevent tearing and bending, and is ideal for projects that will be handled frequently.
④ Lastly, you can choose whether or not the tabs are pre-punched with 3-holes for ring binders.
Yet another benefit of copier tab dividers is the fact that they are made of a heavy weight 90# white, which is thick and durable, but will still easily run through many copiers and printers. To compare, standard printer paper is a 20# stock, so you can see that this is quite a bit thicker. The thick paper makes it more resistant to tearing, whether you choose pre-punched holes, or punch them yourself).
THINGS TO CONSIDER:
THE BOTTOM LINE:
Copier tabs are an essential tool for offices and businesses of all kinds that need the ability to print their own tabs, on-demand. Before you buy, be sure to check the manual for your printer or copier to be sure it can handle index dividers. And don't forget to pair these tabs with either our durable poly / plastic ring binders or our popular clear view binders.
As you can imagine, there are thousands of different printer models available on the market, and we are unable to test every single model for compatibility. For a general list of tested printers, click here, but know that this is not a complete list; your printer might not be on this list, but could very well be compatible. Check your printer user manual for compatibility.
Our experience shows that Mylar tabs should be compatible with all copier machines unless they use an EA Toner. If your machine uses EA toner, then it requires a special Mylar.
Different copiers/printers will accept different tab collations; check your machine user manual for compatible options before you buy.