EPX700 Heavy Duty Console Punch

Regular price:$21,950.00
Call for more detail

Product Description


Buyer's Guide
Printable Brochure

Binding Tip: Place your back cover on top of your front cover before inserting the wire-o element. After inserting and closing the wire, fully rotate the back cover around to the back of the book. This step hides the seam where the two edges of wire meet and gives the book a smooth, clean finish.

Must Ship Via Truck – Click To Request A Quote


» Shop by Brand                   » Shop Supplies



The James Burn Lhermite EPX700 is a manually fed punching machine designed for intensive commercial use. It caters to a wide variety of materials of almost any shape and size including Paper, Covers, Card, Backboards, Plastic, Acetates, Snap-out sets, and more. It offering flexibility of operation, high performance, and a very short set-up time and is ideal for the busy finishing department. The strength and high quality of the punching tool ensures long term reliability and the compact dimensions of the EPX700 allow easy installation in busy work locations.

Foot pedal controlled, this heavy duty floor punch capable of punching up to a maximum binding edge of 26" (unit requires a special order die and attachment for 26"). A major advantage of the EPX700 us the interchangeability of its tools with the Lhermite EP range and larger Automatic Punching Machines. It accepts 15" EX380 and 24" EX610 punching dies (not included). A range of inexpensive adapter kits permit cheaper upgrading and reduce tooling costs for larger installations. The EPX700 is a freestanding machine with a generous working area. Tool changes are simple and take approximately 5 minutes.

Questions? Call us at (866)537-2244.

Specifications and Features:

    ModelEPX700
    ManufactureJames Burn
    Binding StyleWire-O
    Maximum Punching Length26"
    Maximum Sheet Width27.6"
    Punching Thickness3-5mm dependant on materials
    Operating Speed120 strokes/minute
    Sheet Width700mm
    Punching Capacity4mm
    Max Sheet Width700mm
    Length of Unpunched EdgeNo Limit
    Maximum Punching Length660mm
    Frontlay to Top PerforationTools With Fixed Margin: 15mm Max
    Tools Without Fixed MarginNo Limit
    Maximum Individual Perforation Size45mm
    Stroke Movement10mm
    Machine Cycle Speed90 strokes/minute
    Depth of Front Table380mm
    Depth of Rear Table290mm
    Table Height900mm
    Electrical Supply/Motor Output200V 1 Phase (50Hz) or 380V 3 Phase (50 or 60Hz)
    Tool Change Time5 to 10 Minutes Depending on Tools
    ToolsThese are supplied in standard lengths of 330mm and can be butted together for wider work. All have removable pins to suit different sizes of paper
    Maximum Recommended Sheet Punching ThicknessWire-O; Multi-O; Spiral Adjustable up to 40 sheets (100gsm)
    Tear-off perforations and delicate work1mm or 10sheets (10mm stroke essential)
    Index Cutting, Round Cornering5-6 mm with 10mm stroke, 10-15mm with 25mm stroke
    Scoring/Clearing1mm/5mm
    Dimensions37.5" x 31.5 x 45.3"
    47" x 47" x 59" (Packaged)
    Net / Shipping Weight880 lbs.
    Product Code04JBEPX700
    List Price$21,950
    You SaveN/A
    Our PriceCall for Quote (866)537-2244


» Shop by Brand                   » Shop Supplies



The James Burn Lhermite EPX700 is a manually fed punching machine designed for intensive commercial use. It caters to a wide variety of materials of almost any shape and size including Paper, Covers, Card, Backboards, Plastic, Acetates, Snap-out sets, and more. It offering flexibility of operation, high performance, and a very short set-up time and is ideal for the busy finishing department. The strength and high quality of the punching tool ensures long term reliability and the compact dimensions of the EPX700 allow easy installation in busy work locations.

Foot pedal controlled, this heavy duty floor punch capable of punching up to a maximum binding edge of 26" (unit requires a special order die and attachment for 26"). A major advantage of the EPX700 us the interchangeability of its tools with the Lhermite EP range and larger Automatic Punching Machines. It accepts 15" EX380 and 24" EX610 punching dies (not included). A range of inexpensive adapter kits permit cheaper upgrading and reduce tooling costs for larger installations. The EPX700 is a freestanding machine with a generous working area. Tool changes are simple and take approximately 5 minutes.

Questions? Call us at (866)537-2244.

Specifications and Features:

    ModelEPX700
    ManufactureJames Burn
    Binding StyleWire-O
    Maximum Punching Length26"
    Maximum Sheet Width27.6"
    Punching Thickness3-5mm dependant on materials
    Operating Speed120 strokes/minute
    Sheet Width700mm
    Punching Capacity4mm
    Max Sheet Width700mm
    Length of Unpunched EdgeNo Limit
    Maximum Punching Length660mm
    Frontlay to Top PerforationTools With Fixed Margin: 15mm Max
    Tools Without Fixed MarginNo Limit
    Maximum Individual Perforation Size45mm
    Stroke Movement10mm
    Machine Cycle Speed90 strokes/minute
    Depth of Front Table380mm
    Depth of Rear Table290mm
    Table Height900mm
    Electrical Supply/Motor Output200V 1 Phase (50Hz) or 380V 3 Phase (50 or 60Hz)
    Tool Change Time5 to 10 Minutes Depending on Tools
    ToolsThese are supplied in standard lengths of 330mm and can be butted together for wider work. All have removable pins to suit different sizes of paper
    Maximum Recommended Sheet Punching ThicknessWire-O; Multi-O; Spiral Adjustable up to 40 sheets (100gsm)
    Tear-off perforations and delicate work1mm or 10sheets (10mm stroke essential)
    Index Cutting, Round Cornering5-6 mm with 10mm stroke, 10-15mm with 25mm stroke
    Scoring/Clearing1mm/5mm
    Dimensions37.5" x 31.5 x 45.3"
    47" x 47" x 59" (Packaged)
    Net / Shipping Weight880 lbs.
    Product Code04JBEPX700
    List Price$21,950
    You SaveN/A
    Our PriceCall for Quote (866)537-2244

Follow Me on Pinterest
Follow Me on Twitter
Secure 128-bit Encrypted E-Commerce provided by Yahoo! Small Business
Pronto Top Seller - Office
Binding 101 is an Upfront Merchant on TheFind. Click for info.
What our customers are saying...