Royal Sovereign RSH1151 45" Wide Format Roll Laminating Machines

Today we're going to show you how easy and simple it is to create a Silver Linings mount frame.

The first thing you would do is peel back the release liner on your frame. Place your frame into your jig. Align your photo with the frame and tack your photo down to where the adhesive was exposed. Now, taking your roller, simply roll the picture as you are releasing the liner. Now you've got your picture mounted on your frame, simply take the safety cutter to trim the excess photo off your frame.

And there you've got your beautifully finished mount frame.

Now the other thing on your mount frame is there is a stand that comes with the frame. Simply remove your stand from the back of the frame and screw it into the back. And there you have it so it can stand on a desk or a table. And you have a beautifully finished Silver Lining mount frame.

Subscribe to our YouTube for more ► https://www.youtube.com/c/binding101

These detailed instructions walk you through just how easy it is to make DIY modern photo frames using SilverLinings Self Stick Photo Mounting Blocks and the SilverLinings accessory kits.

To follow along with these instructions, you will need:
• SilverLinings Block in your choice of size
• Self-healing cutting mat
• Handheld rotary cutter
• Brayer hand roller
• Frame alignment guide
• Photo gloves
• Photo to match size of your photo block

Start by placing your alignment guide (referred to as the “jig” in this video) against your photo block. Starting at the corner opposite the guide, peel the adhesive liner back a couple of inches and crease it to it stays up. Put on your photo gloves to avoid finger prints on the photo. Now take your photo and place it so that the top and left sides extend over the block and onto the guide; you will see there is a groove to allow for this. Now press the photo onto the exposed corner of adhesive. Hold the rest of your print up as you peel the remainder of the liner off the photo block. Gently roll the photo down, consecutively as you lightly use the brayer/hand roller to roll the photo from the stuck corner, outward to the opposite corner. Now roll over the print in all directions, more firmly to fully adhere. Be careful of your pressure on the edges of the frame to avoid damaging them. Next, lift the photo block up and flip it so it is face-down. Position your cutter on one edge, using the arrow guides to align it. Press down firmly and roll the cutter along the edge. Repeat that step for each edge, making sure to match up those arrow guides on each end. And you’re done!

The SilverLinings self-stick photo blocks are great for photographers with wedding, engagement, pet, and other specialties, as well as for vacation, travel and timeshare businesses, and even fine art galleries. They are also perfect for other displays, such as notices and marketing tools within medical offices – use them as a check in notice, or other important long-term signage throughout your office. Or use them for any modern display or sign for your business, organization, restaurant, etc. These photo blocks are sold in small packs of just 10, and are incredibly affordable, so are accessible for all businesses and individuals.

- - -
Buddha by Kontekst https://soundcloud.com/kontekstmusic Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library https://youtu.be/b6jK2t3lcRs