EyeleD™ Red LED Positioning Pointer for ClipsShop Grommet Presses
88 NewCondition InStock

EyeleD™ Red LED Positioning Pointer for ClipsShop Grommet Presses

Item #: 04GRCSTIDY41LED
  • Compatible Equipment: ClipsShop CSTEP-2 (new generation* models only), CSTIDY-41 and CSTIDY-51 Grommet Press
  • Power Voltage: 110 V
  • Tools Needed for Assembly: Screwdriver (Phillips), Allen Wrench
  • Part Number: 04GRCSTIDY41LED
  • 85+ Years Experience
  • Free Shipping $75+
  • Brand New
  • In Stock

$88.00

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
  • 3
video

Overview

With the EyeleD™ positioning pointer you can get a perfectly precise grommet placement guide to help you set your grommet in the exact location you need it. This LED positioning pointer creates a double circle red guide, with the center dot showing you the precise center of your grommet. No more guessing or positioning with a marker on your material, this laser pointer grommet positioner makes your operator's lives easier, while saving time, increasing accuracy, and speeding up the grommet process.
This LED laser pointer is compatible with several different ClipsShop grommet press machines, including the CSTIDY-41, the CSTIDY-51, and the new generation CSTEP-2*. Included with your pointer is an adjustable mounting bracket, power cable, and portable battery holder for mobile use (such as when you're using the CSTIDY-41 with the mobile cart). Because it is LED, it consumes very little power, and the battery pack will last all day, and beyond.

Specifications

Item #04GRCSTIDY41LED
ManufacturerClipsShop
Manufacturer Part Number8680211763516
Included Supplies & AccessoriesLED Pointer
Adjustable Mounting Bracket & Screws
AC Adapter Power Cable
Portable Battery Holder
Compatible Supplies & Accessories2 AA Batteries (Not Included) for Portable Battery Holder
Dimensions1.14" x 2.68" (29mm x 68mm)
Power Voltage110 V
Assembly RequiredYes [Tools Not Included]
Tools Needed for AssemblyScrewdriver (Phillips), Allen Wrench
Compatible EquipmentClipsShop CSTEP-2 Grommet Press (new generation* models only)
ClipsShop CSTIDY-41 Grommet Press
ClipsShop CSTIDY-51 Grommet Press
Shipping Weight (lbs)2

Description

Have you ever hassled with grommets being set off-center, putting your entire material piece to waste, basically throwing your business' money in the trash? Or hassled with the lifting and lowering and lifting and lowering to check and re-check your positioning before you set the grommet? No more! With the EyeleD™ LED laser pointer, you can get exact grommet placement, ever time. This positioning pointer shows you exactly where your grommet will be set, before you set it, eliminating any guesswork.

The EyeleD can be mounted onto several ClipsShop grommet press machines, including the CSTIDY-41, CSTIDY-51, and even the new generation of CSTEP-2* machines. It will help your operators achieve a perfectly placed grommet, every time. It offers mobility with an included battery pack that takes two AA batteries (not included); the means that even if your're using your CSTIDY machine with the mobile cart, or using it further away from an outlet, you can still use the precise laser pointer. The LED light is clear, accurate, and lasts for a very long time; the battery pack will last for hundreds of hours of use.

Included with your LED pointer is a mounting bracket that has holes large enough to allow for adjustment and configuration with the three different grommet press machines. To mount, you will just need your own Phillips head screwdriver and allen wrench. Simple operation means no hassle and no special training is needed when you add this accessory to your grommet press. The accuracy will help prevent wasted materials from improperly placed grommets, and make life on your operators easier.


* New generation CSTEP-2 grommet presses will have a hole on the side of the head to allow for mounting. Older models without this hole are unable to accommodate this accessory, and are not compatible.

Videos

How to Install the EyeleD LED Laser Pointer on Grommet Press

Transcript: Subscribe to our YouTube ► https://www.youtube.com/c/binding101

Here’s how to install the EyeleD LED Laser Pointer onto the new generation CSTEP-2 grommet press. This positioning tool is also compatible with the CS-TIDY-41 and 51 models, and the install instructions are the same.

Let’s start by assembling the unit. Line up the holes on the mounting bracket and LED pointer, attaching them first with the Phillips screw, and then with the wing nut. Now screw the pointer onto the machine usi...
Read More
Subscribe to our YouTube ► https://www.youtube.com/c/binding101

Here’s how to install the EyeleD LED Laser Pointer onto the new generation CSTEP-2 grommet press. This positioning tool is also compatible with the CS-TIDY-41 and 51 models, and the install instructions are the same.

Let’s start by assembling the unit. Line up the holes on the mounting bracket and LED pointer, attaching them first with the Phillips screw, and then with the wing nut. Now screw the pointer onto the machine using the allen screw, and tighten with your allen wrench.

NOTE: If your CSTEP-2 does not have a hole in the side as shown, then it is not a new generation model, and is not compatible with this pointer.

Now plug in the laser using either the portable battery pack or directly into an outlet. The position of the laser is adjustable.

Now you will want to run a test for accuracy.

For more information or to buy the EyeleD LED Pointer for your ClipsShop grommet press, call the number on your screen. And don’t forget to give this video a thumbs up if it was helpful, and subscribe for more.

Product Reviews

Write Your Own Review
You're reviewing:EyeleD™ Red LED Positioning Pointer for ClipsShop Grommet Presses
Your Rating

Frequent Asked Questions

Submit a New Question