Black Foam Core Pouch Boards with Pressure-Sensitive Adhesive (Box of 10)
- 3/16" thick black foam core board
- Color: Black
- Laminate Finish: Gloss or Matte
- Adhesive: Cold / Pressure-Sensitive
Starting at: $163.75
• Laminate Finish: Gloss or Matte
• Adhesive: Pressure-Sensitive (Cold)
• Colors: Black
• Sizes: 8 ½" x 11 ½" through 24 ½" x 36 ½"
• Thickness: 3/16"
• Qty: 10 Boards / Box
|Manufacturer Part Number||PCHBRDBCF GRP|
|Compatible Equipment||Select Roll Laminating Machines (Cold, 3/16" Mounting-Capable)|
|Laminate Finish||Gloss or Matte|
|Adhesive Type||Cold/Pressure Sensitive|
|Board Type||Foam Core|
|Shipping Information||Boards up to 32" x 40" ship via UPS|
Larger sizes ship via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.
Pouch boards are one of our best-selling products in the laminating/mounting field. But what exactly is a pouch board? They are a convenient tool that essentially combines a mount board, a laminate pouch, and a mounting adhesive into one piece. These boards have a laminate sheet attached to one side, sealed to the short end of the board. Simply lift the laminate sheet to insert your print below, and then run the entire board through your compatible machine. While in your laminator, the adhesive below the print activates, along with the adhesive on the laminate itself, to mount and laminate in one step. Pouch mounting boards are a cost-effective solution that not only saves you money, but also a lot of time. Instead of adding adhesive to your boards (step one), then mounting your print to the adhesive (step 2), and then applying a laminate to the print (step 3), pouchboards get it all done in one run.
These particular pouch boards are a black color, made with a 3/16" thick foam core (lightweight polystyrene) with smooth, clay coated surfaces that surrounds it - this combination offers a lightweight, yet rigid mount board. The adhesive on these boards is pressure-sensitive (also called cold), which means you don't need a machine to use them; just peel off the liner and stick your print. You can use a cold mounting-capable machine for larger volumes, though. They are available in sizes from 8.5" x 11.5" through 24.5" x 36.5" sheets. The laminate is attached to one short end of one side of the board. It is available in either a high gloss or soft matte finish.