The Keencut Excalibur 5000 Specialty Board Cutter is designed to cut all the sheet materials used in the modern graphics and signmaking industries. The Excalibur 5000 Trimmer cuts vertically, providing the ultimate in space saving convenience. It cuts sheet materials easily, cleanly, and accurately, every time. The super-grip clamp holds even thick materials at any required angle, and the clear rule along the cutting line allows easy alignment to artwork, lines, or registration marks. The Excalibur 5000 Trimmer delivers accurate, fast cutting, with square, clean cuts to the correct size every time. It is so easy to use, that even untrained or new operators will master it in minutes.
Changing blades & tools is easy with the Indexed Turret, (mounted on sliding head) which simply turns to lock any one of three cutting tools in its selected operating position. With no screws to loosen or tools to find, changing blades has never been easier.
The Excalibur 5000 Cutter features a One Piece Squaring Arm
. This horizontal squaring arm is machined from one single heavy duty aluminum extrusion so that both the left and the right are in perfect alignment with each other. The Vertical Cutting Bar
and the surface of the material being cut have no gap when clamped down. It is steel re-enforced and won't bend or flex when cutting dense thick materials like 1/2" Sintra Board and Gatorboard. The Pressure Sensitive Clamp
provides light clamping that gives the user the ability to line up the board to hold the position, but allows it to be positioned under the clamp for final alignment. The Cutting Line Indicator is a clear plastic strip located along the left side of the vertical cutting bar that accurately indicates the cut line. This Multi-Purpose cutter also features Ratchet Control
, which allows you to cut dense materials in multiple passes. Two Flip Stops
can be engaged or disengaged without disturbing the settings. Accurate cutting by eye is made simple by the dual calibrated scales. The Counter Balance
takes the effort out of lifting the cutting head. When released, the balanced cutting head stays in the last position ready for the next operation. The counter balance weight can be transferred to the upper or lower cutting head with the flip of a switch. Mounted to the wall at the top end only, two adjustable legs
can adjust upon installation to suite the height of the user. A Squaring Adjuster Wheel
is located at the Vertical Cutting Bar, and provides easy and accurate 90° squaring adjustments. Large Back Panels
on both sides of the machine give maximum support to the material being cut.
Included with your purchase of the Excalibur 5000 Cutter, you will receive 100 Medium Duty Utility Blades, which are used for cutting up to 1/2" thick sheets of Foam Board, Gator Board, Sintra Board, Corrugated Cardboard, and Corrugated Plastic Boards. You will also receive a Scoring Blade for acrylics and other ridged plastics as well as a Tungsten Carbide Cutting Wheel for scoring glass and mirrors up to 1/4" thick. In addition you receive the patented Top Twin Wheel Cutting Head for cutting 1/8", uncoated masonite, mat board, .040 aluminum and 3mm Dibond. This cutting head cuts with minimum effort and leaves no distortion or duct. Lastly, the Exclaibur 5000 includes a sturdy Wall Mounting Kit that allows for easy wall mounting and perfect cutting of all materials.
Outstanding Features of the Excalibur:
Turn & Lock ready mounted tools for instant action
All four blades cut on the same line; Utility Blade, Acrylic Scoring Blade & Glass Scoring Wheel
Complete backboard set for support and convenience.
Complete set of vertical and horizontal scales (Imperial and Metric).
One piece squaring arm so that both left and right sides are in perfect alignment.
Full length extra-grip clamping system.
Clear Plastic Cutting Strip located along the left side of the vertical cutting bar that accurately indicates the cut line.
Telescopic legs adjust for height & minimum fatigue.
Two Flip Stops make cutting to size easy. Flip stops can be engaged or disengaged without disturbing the settings.
Universal turret cutting head with automatic blade disengagement at the end of cut.
Built-in ratchet allows you to cut materials to the depth required.
Fully equipped with 100 medium duty blades.
Optional Free Standing Kit to use the Excalibur anywhere in your workshop.
Excalibur comes with Wall Mounting Kit.
Questions? We are here for you. Call us at (866)537-2244.
|Maximum Cutting Width||63"|
|Cuts Through||Matboard, cardboard, PVC|
Hardboard and MDF up to 3mm (0.12") thick
Scores glass up to 6mm (0.24") thick
Foamboard up to 13mm (0.50") thick
Foam centered board
Honeycomb & corrugated plastics
Aluminum Faced Plastics
and semi-thick materials up to 136cm thick
|Cutting Capacity||Medium Duty Utility Blade: 1/2" thick|
Tungsten Carbide Cutting Wheel: 1/4" glass & mirrors
Top Twin Wheel Cutting Head: 1/8", uncoated masonite, mat board, .040 aluminum and 3mm Dibond
|Safety Features||Cutter head retracts when not is use|
Blade head is covered
|Included Accessories||Wall Mounting Kit|
100 Medium Duty Utility Blades
1 Acrylic Scoring Blade
1 Tungsten Carbide Glass Scoring Cut Wheel
1 Twin Wheel Cutting Head
|Optional Accessories||Free-Standing Kit|
Acrylic Scoring Blade
Tungsten Carbide Glass Scoring Cut Wheel
XR Utility Blades
Twin Wheel Cutting Head
|Net Weight / Shipping Weight||240 lbs. / 278 lbs.|
|Ships Via||Truck; Click to Request a Quote|
|Dimensions||84" W x 12"-16" D x 82" or 96" H|
|5 Year Limited|
20 Year Bearings