SealerSales W-Series Direct Heat Foot-Operated Sealers

The SealerSales W-Series Direct Heat Foot-Operated Sealer is equipped with 15mm PTFE coated serrated seal bars and can seal materials up to 18" wide and 20mil thick. It can seal a variety of thermoplastic materials, including coated aluminium foil, Kraft paper, cellophane, polypropylene, poly-nylon, and other thicker materials. This sealer has a German-made thermostat that precisely regulates the temperature between 30°- 550° F (0°-300° C). Due to simultaneous heating of both jaws, thicker materials can be sealed with greater heat penetration. This SealerSales W-Series Direct Heat Foot-Operated Sealer features a 26" high pedestal stand, an adjustable work table, and safety guard rails around the jaws.

Features:

• Can seal materials up to 18" wide and up to 20mil thick
• Equipped with a German manufactured thermostat that accurately controls the temperature from 30°-550° F (0°-300° C).
• Both jaws are heated simultaneously so there is better heat penetration to seal thicker materials.
• Includes an adjustable work table.
• The pedestal stand is 26" high.
• Easy to operate:
  Set the temperature on the thermostat or the thermo-controller depending on the material to be sealed. Once the correct setting has been reached, consistent seals will be maintained automatically. Insert the material between the two sealing bars. Press down on the footboard and release.