White Gator Pouch Boards with Pressure-Sensitive Adhesive (Price per Box)
- 3/16" thick gator board.
- Offer a heavier duty solution that is more resistant to dents, cuts, and punctures.
- Will mount and laminate your prints in one simple step
- Have a laminate sheet attached directly to one side.
Starting at: $235.75
• Laminate Finish: Gloss or Matte
• Adhesive: Pressure-Sensitive (Cold)
• Colors: White
• Sizes: 18" x 24 ½" or 24" x 36 ½"
• Thickness: 3/16"
• Qty: 10 Boards / Box
|Manufacturer Part Number||PCHBRDGWC GRP|
|Compatible Equipment||No Machine Required|
Select Roll Laminating Machines (Cold, 3/16" Mounting-Capable)
|Laminate Finish||Gloss or Matte|
|Adhesive Type||Cold/Pressure Sensitive|
|Board Type||Gator Board|
|Shipping Information||Boards up to 32" x 40" ship via UPS|
Larger sizes ship via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.
Pouch boards are one of our best-selling products in the laminating/mounting field. But what exactly is a pouch board? They are a convenient tool that essentially combines a mount board, a laminate pouch, and a mounting adhesive into one piece. These boards have a laminate sheet attached to one side, sealed to the short end of the board. Simply lift the laminate sheet to insert your print below, peel off the adhesive liner, and seal your print using pressure (or a board-compatible cold mounting/laminating machine). With just pressure, the adhesive below the print activates, along with the adhesive on the laminate itself, to mount and laminate in one step. Pouch mounting boards are a cost-effective solution that not only saves you money, but also a lot of time. Instead of adding adhesive to your boards (step one), then mounting your print to the adhesive (step 2), and then applying a laminate to the print (step 3), pouchboards get it all done in one run.
These particular pouch boards are made with an extra-strong gator board, instead of the traditional foam core. Gator pouch boards offer a heavier duty solution that is more resistant to dents, cuts, and punctures. These heavy duty boards have a hard Luxcell surface and are most popular for professional photo mounters and artists, exhibit builders, engineers, and anyone else who needs a board that can withstand heavy handling and offer a premium finish. They are 3/16" thick white sheets with a pressure-sensitive (or cold) adhesive, which means you don't have to have a machine to use them, although we do recommend using a machine (or at minimum, a hand roller) for professional users or larger board sizes. They are available in either 18" x 24.5" or 24" x 36.5" sizes. The laminate is attached to one short end of one side of the board, and available in either a gloss or soft matte finish.