Corner Stapler For MBM FC 10 Automatic Collator
3749.09 NewCondition InStock

Corner Stapler For MBM FC 10 Automatic Collator

Brand: MBM
  • Stack Thickness: 10-Sheets
  • Operation: Electric
  • Included Supplies & Accessories: High-Capacity 5,000 Staple Cartridge
  • Maximum Sheet Size: 8-1/2" x 11" through 11" x 17"
Additional Sizes Below
  • 85+ Years Experience
  • Free Shipping $75+
  • Brand New


Buy Now, Pay Later with financing options from $347/mo.Learn More >

Product NameItem NumberPriceQty
MBM FC 10 Ten-Bin Automatic Collator04MBMFC10A
Stand For MBM FC 10 Automatic Collator04MBMFC10STAND
Stand For MBM FC 10 Corner Stapler Module04MBMFC10STAPSTD
Staple Cartridge for MBM FC 10 Corner Stapler05MBMAC1475632


When you buy the corner staplers for the MBM FC 10 automatic collator online, you are adding the ability to not only collate your sprinted sheets into sets, but to staple them together too, essentially eliminating a normally manual step in the print-finishing process. This add-on machine also works when you use the FC 10 Twin Tower System. Once you have your corner stapler and collator system, simply connect the unit and use the user-friendly controls to set up your job to include the stapling function. The staple cartridges have a 5,000 staple capacity, so cartridge change-out is infrequent. There is a dust trapper waste bin at the back of the stapler so you can easily empty the paper scraps as needed. There is a stapling position lever that lets you set your staple for one of four settings, depending on the paper size (some sizes staple horizontally on the top right corner, and others staple vertically on the top corner). Some daily maintenance is needed to keep the FC 10 stapler working at tits full potential, so be sure to check out the user manual for information on what is needed.

Note: if you are using the FC 10 Stand for your collators themselves, you will need to also invest in the corner stapler stand to ensure the height is leveled with the machine.


ManufacturerMBM Corporation
Manufacturer Part NumberCO0753
Capacity*Stack Thickness: 10-Sheets
Included Supplies & AccessoriesHigh-Capacity 5,000 Staple Cartridge
Maximum Sheet Size8-1/2" x 11" through 11" x 17"
Shipping Weight (lbs)57


The Corner Stapler attachment to the MBM FC-10 Ten-Bin Automatic Collator is a fast and efficient way to bind collated sets together. Capable of stapling stacks with as many as 10 sheets*, the corner stapler can be used with paper sizes ranging from 8-1/2" x 11" through 11" x 17". It comes equipped with a high capacity 5,000 staple cartridge.

Product Reviews

Write Your Own Review
You're reviewing:MBM FC 10 Ten-Bin Automatic Collator and Accessories
Your Rating

Frequent Asked Questions

Machine will not run. Like there is no power to it. Is there a reset switch
Asked by Buck Travis
Hi Buck -- We will have someone reach out to you ASAP with resources to help. Thank you.
Answer by Binding101

Submit a New Question