42" Keencut ARC Model 60606 Advanced Rotary Cutter
• 60" Model 60609
• 80" Model 60613
• 100" Model 60611
• 120" Model 60612
|Manufacturer Part Number||60606 60609 60613 60611 60612|
|Included Supplies & Accessories||2 Tungsten Steel Cutting Wheels, Yellow Site Line Strip|
|Compatible Supplies & Accessories||ARC Stands|
ARC Replacement Cutting Head 69122
ARC Replacement Cutting Wheel 69124
ARC 36" Extended Measuring Arm 69208
|Dimensions||17-1/2" D x 2-1/2" H (Width Varies by Model)|
|Manufacturer's Warranty||20 Year Limited on Bearings + 5 Year General|
|Country of Manufacture||England|
|Can Cut Materials||Cardboard ≤ 1mm, Mountboard ≤ 1mm, Tissue, Banner, Magnetic Sheet ≤ 1mm, Self-adhesive materials, & More. Call (866)537-2244 for Sample Material Testing.|
|Shipping Information||Some sizes require shipment via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.|
Formerly known as the Keencut Technic, the new and improved Keencut Advanced Rotary Trimmer (ARC) features a unique sub-surface monorail bearing system and twin cutting wheels that place it in a class of its own. There is no overhead guide mechanism to obscure the cut line and the mechanism will not distort under heavy cutting pressure. The two tungsten steel cutting wheels give unrivaled performance with precise cuts and long life with two way cutting capabilities.
The Keencut ARC Trimmer is capable of cutting the thinnest tissue and film, flexible sheet materials, thin cardboard or chip board, aluminum plates up to .004, plastics and paper-- cleanly, safely and precisely. Two clamp rollers provide secure double clamping during cutting with up to double the gripping effectiveness of other rotary cutters, ensuring that you get the perfect cut, every time.
ARC Key Features:
- Cuts easily in both directions.
- Unique monorail bearing system design, positioned underneath the surface of the baseboard.
- The mounting plate with pre-drilled, counter-sunk holes butts flush to the edge of your table.
- Two integral roller clamps provide secure clamping during cutting.
- Extruded silver anodized aluminum base.
- No overhead guide mechanism to obscure the cut line.
- Includes two tungsten steel cutting wheels for two way cutting.
- Bright yellow clamping strip for better visibility of the cut line.
- 20 year warranty on bearings + 5 year general warranty on parts.
- 100% Made in England.
Keencut ARC Tested and Approved Materials:
This multi-substrate cutter works great with all of the below materials that have been tested and approved, but it is not limited to these materials. So if you have a substrate not listed and want to test it before you buy, give us a call at (866) 537-2244 so we can arrange some sample testing. The capacity may vary depending on the structure and hardness of the material being cut.
- Aluminum Plate ≤ 0.004"
- Cardboard ≤ 1mm
- Flexible sheet materials
- Magnetic sheets ≤ 1mm
- Mount board ≤ 1mm
- Photo paper
- Self-adhesive vinyl
*Capacity may vary depending on material being cut, operator, and other factors.