James Burn EPX700 Automatic Binding Punch Machine
28355 NewCondition InStock

James Burn EPX700 Automatic Binding Punch Machine

Item #: 04JBEPX700
Brand: James Burn
  • Paper Size: 26" x 27 1/2"
  • Selectable Speeds: Up to 50 Cycles / Minute
  • Maximum Punching Thickness: 4 mm
  • Disengageable Die Pins: Yes (Removable Pins)
Additional Sizes Below
  • 90 Day Manufacturer Warranty
  • 85+ Years Experience
  • Oversize / Truck shipping
  • Brand New


Buy Now, Pay Later with financing options from $2,623/mo.Learn More >

  • 0
  • 1


This commercial-level binding punch machine was designed to handle intense workloads with manual feeding, combining automation with flexibility. It will punch a huge variety of materials in many sizes, including paper stocks of all kinds, covers, backboards, plastics, snap-out sets, and much more. This high-performance automatic binding punch offers strength and reliability, as it was manufactured to last for long-term, heavy usage. It features a small footprint for the power it packs, saving you real estate on the shop floor, and can be set up for jobs in just about 5 minutes, with just a 5-10 minute approximate tool change time between jobs. The EPX700 is compatible with the EX380 15" dies or the the EX610 24" dies, which makes it extremely versatile and unlike any other unit currently on the market. There are a variety of adapter kits that permit inexpensive upgrades and reduced tooling costs for wider format document punching. Plus, the dies can be sharpened with our express die sharpening service.
For more EPX700 features and valuable information about this heavy duty punch machine, check out our full product description below, and be sure to take a look at the specifications and even compare them to other machinery so you can make the best buying decision. If you have any questions, or are ready to speak to our James Burn experts, call (866) 537-2244 or email info@buy101.com.


Item #04JBEPX700
ManufacturerJames Burn
Manufacturer Part NumberEPX700 US
Suggested UserIndustrial
Binding StyleMultiple Binding Styles
Operation: PunchingElectric
Compatible Supplies & AccessoriesEX380 15" Punching Dies
EX610 24" Punching Dies
Power Voltage200v Single Phase 50 Hz
380v 3 Phase 50/60 Hz
Dimensions37 ½" W x 31 ½ D x 45 ³/₁₀" H
Punch & Bind CapabilityPunch Only
Setup TimeLess than 5 Minutes
Die Change Time5-10 Minutes
Paper Size26" x 27 ½"
Accepted Paper TypeNo Stock Limitations
Selectable SpeedsUp to 50 Cycles / Minute
Maximum Punching Thickness4 mm
Air Compressor RequirementsNo Air Compressor Required
Control PanelNo Control Panel
Die Sharpening AvailableYes, Express Die Sharpening Service is Available
Disengageable Die PinsYes (Removable Pins)
Die / Tool StorageNo Die Storage On-Unit
Hands-Free OperationNo
Monthly Volume / Duty RatingContinuous Use (Monthly Volume Dependent on Operator and Shifts)
Special Training RequiredNone
Product Weight (lbs)882
Shipping Weight (lbs)1040
Shipping InformationThis item ships via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details.


With the James Burn EPX700 heavy duty console punch, your commercial-level punching output can be increased to an impressive 50 cycles per minute, which amounts to about 3,000 every hour. With just 1 operator needed to be present and run the machine, the EPX700 can also decrease your labor costs, so your staff can perform other tasks throughout your plant. This powerful automatic binding punch will work with paper sizes up to 26" x 27 ½" with no limitations for the paper stock type, just a max punching thickness of 4mm. There is no air compressor required to run this industrial binding punch, and removable punching pins on the dies allows for complete customization of your punching pattern. A quick 5 minute setup means you can spend less time prepping the machine, and more time running it. One major benefit of the EPX700 by James Burn is it's ability to work with either EX380 or EX610 punching dies, and is often paired with these machines for items than cannot run on the automatic line.

The manually-fed punching machine is designed for continuous operation in a commercial environment. It can run a huge variety of materials including paper, plastic, covers, card stocks, backboards, acetates, spap-out sets, and more. It offers high-performance output, flexible and simple operation, and a fast punch that is the 1st important step to a perfect finished book. Compact dimensions measuring just 37 ½" W x 31 ½ D x 45 ³/₁₀" H mean it is easy to place anywhere in your shop easy installation in busy work locations.

Maximum Recommended Sheet Thickness

   • Punching (Wire-O, Spiral Coil, Multi-O ): Adjustable up to 40 sheets (100gsm)
   • Tear-off perforations (for delicate work): 1mm or 10 sheets (10mm stroke essential)
   • Index cutting, round cornering: 5-6mm with 10mm stroke, 10-15mm with 25mm stroke
   • Scoring/clearing: 1mm/5mm

Frontlay Top Perforation

   • Tools with a fixed margin: 15mm maximum
   • Tools without a fixed margin: No limit

*May vary depending on sheet size, paper stock, operator, and other factors.

Product Reviews

Write Your Own Review
You're reviewing:James Burn EPX700 Automatic Binding Punch Machine
Your Rating

Frequent Asked Questions

Submit a New Question