James Burn EPX700 Automatic Binding Punch Machine
- Paper Size: 26" x 27 1/2"
- Selectable Speeds: Up to 50 Cycles / Minute
- Maximum Punching Thickness: 4 mm
- Disengageable Die Pins: Yes (Removable Pins)
- Oversize / Truck shipping
$28,355.00
- 0
- 1
Overview
Specifications
| Item # | 04JBEPX700-GRP |
|---|---|
| Manufacturer | James Burn |
| Manufacturer Part Number | EPX700 US |
| Suggested User | Industrial |
| Binding Style | Multiple Binding Styles |
| Operation: Punching | Electric |
| Compatible Supplies & Accessories | EX380 15" Punching Dies EX610 24" Punching Dies |
| Power Voltage | 200v Single Phase 50 Hz 380v 3 Phase 50/60 Hz |
| Castors | No |
| Dimensions | 37 ½" W x 31 ½ D x 45 ³/₁₀" H |
| Punch & Bind Capability | Punch Only |
| Setup Time | Less than 5 Minutes |
| Die Change Time | 5-10 Minutes |
| Paper Size | 26" x 27 ½" |
| Accepted Paper Type | No Stock Limitations |
| Selectable Speeds | Up to 50 Cycles / Minute |
| Maximum Punching Thickness | 4 mm |
| Air Compressor Requirements | No Air Compressor Required |
| Control Panel | No Control Panel |
| Die Sharpening Available | Yes, Express Die Sharpening Service is Available |
| Disengageable Die Pins | Yes (Removable Pins) |
| Die / Tool Storage | No Die Storage On-Unit |
| Hands-Free Operation | No |
| Monthly Volume / Duty Rating | Continuous Use (Monthly Volume Dependent on Operator and Shifts) |
| Special Training Required | None |
| Product Weight (lbs) | 882 |
| Shipping Weight (lbs) | 1040 |
| Shipping Information | This item ships via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details. |
Description
With the James Burn EPX700 heavy duty console punch, your commercial-level punching output can be increased to an impressive 50 cycles per minute, which amounts to about 3,000 every hour. With just 1 operator needed to be present and run the machine, the EPX700 can also decrease your labor costs, so your staff can perform other tasks throughout your plant. This powerful automatic binding punch will work with paper sizes up to 26" x 27 ½" with no limitations for the paper stock type, just a max punching thickness of 4mm. There is no air compressor required to run this industrial binding punch, and removable punching pins on the dies allows for complete customization of your punching pattern. A quick 5 minute setup means you can spend less time prepping the machine, and more time running it. One major benefit of the EPX700 by James Burn is it's ability to work with either EX380 or EX610 punching dies, and is often paired with these machines for items than cannot run on the automatic line.
The manually-fed punching machine is designed for continuous operation in a commercial environment. It can run a huge variety of materials including paper, plastic, covers, card stocks, backboards, acetates, spap-out sets, and more. It offers high-performance output, flexible and simple operation, and a fast punch that is the 1st important step to a perfect finished book. Compact dimensions measuring just 37 ½" W x 31 ½ D x 45 ³/₁₀" H mean it is easy to place anywhere in your shop easy installation in busy work locations.
Maximum Recommended Sheet Thickness
• Punching (Wire-O, Spiral Coil, Multi-O ): Adjustable up to 40 sheets (100gsm)• Tear-off perforations (for delicate work): 1mm or 10 sheets (10mm stroke essential)
• Index cutting, round cornering: 5-6mm with 10mm stroke, 10-15mm with 25mm stroke
• Scoring/clearing: 1mm/5mm
Frontlay Top Perforation
• Tools with a fixed margin: 15mm maximum• Tools without a fixed margin: No limit *May vary depending on sheet size, paper stock, operator, and other factors.
Product Reviews
Frequent Asked Questions
Submit a New Question
