Polygenex™ All Day Nylon Lab Gloves [One Size] (5 Pairs)
22.59 NewCondition InStock

Polygenex™ All Day Nylon Lab Gloves [One Size] (5 Pairs)

Item #: 26GLVNLGU
FAQ: 2 Questions, 2 Answers
  • Material: Nylon
  • Color: White
  • Size: One Size Fits All
  • Quantity: 5 Pairs
Additional Sizes Below
  • 85+ Years Experience
  • Free Shipping $75+
  • Brand New
  • In Stock

$22.59

video

Overview

All-Day Nylon Lab Gloves [One Size] (5 Pairs)

Specifications

Item #26GLVNLGU
ManufacturerPolygenex™
Manufacturer Part NumberGLV-NLGU
Quantity5 Pairs
SizeOne Size Fits All
ColorWhite
MaterialNylon
Shipping Weight (lbs)0.5

Description

All-Day Nylon Lab Gloves [One Size] (5 Pairs)

Videos

How to Make a GOframe 1500

Transcript: To begin, gather all the components you need. Your print on canvas, GOframe 1500 Pro Bars in the correct length for your finished frame, a set of GOframe Pro Bar Corners, some corner pins and tensioning inserts, a cutting tool and a bottle of archival quality glue.

Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each ball into the GOframe 1500 Pro Bar Corners using the built in notches and grooves to ensure each bar lays flat.

Place your pri...
Read More
To begin, gather all the components you need. Your print on canvas, GOframe 1500 Pro Bars in the correct length for your finished frame, a set of GOframe Pro Bar Corners, some corner pins and tensioning inserts, a cutting tool and a bottle of archival quality glue.

Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each ball into the GOframe 1500 Pro Bar Corners using the built in notches and grooves to ensure each bar lays flat.

Place your print facedown on the work surface, then position your frame facedown on top. The notches around the edge of each GOframe 1500 Pro Bar Corner can be used as a guide to ensure the frame is straight. Once you are happy with the position of your frame, apply pressure to secure each bar to the back of the canvas. Remove the GOframe 1500 Pro Bar Corners and store them in a safe place for future use.

Trim around the edges to remade the access canvas, then trim diagonally across each corner. Cut into each corner at a 45 degree angle to create corner tabs. These will give a clean corner finish on your stretched canvas frame. Gently left each bar and apply a thin bead of glue down the length between the bar and the canvas. If too much glue is applied, simply wipe away the access with a clean cloth before continuing. Fold up each of the corner tabs and apply pressure to secure them to the end of each bar.

To create the edges of your finished canvas, lift the bars so that the corners meet. Using the pre-drilled holes in each bar, insert a corner pin to hold the bars in place. Finish stretching your canvas with the tensioning inserts. Simply align each insert with the grooves on the back of each bar, then apply pressure to secure in place.

Your frame is now finish, but if you desire a cleaner finish on the back, the narrower piece of tape on the top of each bar can be removed.

How to Make a GOframe 1500 without Glue

Transcript: Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners, using the built-in notches and grooves to ensure each bar lays flat.

To assist in aligning your canvas frame, we recommend marking each corner point. This can be done by holding your canvas print up to the light and placing a small pencil mark at each corner where the edge effect on your print meets the original image. These will be the corners of yo...
Read More
Start by removing the adhesive liner from the wide piece of tape on the front of the bar. Insert each bar into the GOframe 1500 Pro Bar Corners, using the built-in notches and grooves to ensure each bar lays flat.

To assist in aligning your canvas frame, we recommend marking each corner point. This can be done by holding your canvas print up to the light and placing a small pencil mark at each corner where the edge effect on your print meets the original image. These will be the corners of your finished canvas. Position your canvas frame face down on the back of your print and place the small holes in the GOframe 1500 Pro Bar Corners over the pencil marks. Ensure that you are happy with the position of your frame. Then apply pressure to each bar to secure it to the back of your canvas. Use the GOframe 1500 Pro Bar Corners as a guide to cut a diagonal line across each corner of your frame.

Then use the internal guide on the GOframe 1500 Pro Bar Corners to make a small cut into each corner of your canvas print. This will create the tabs needed for a clean corner finish on your stretch canvas. Remove the GOframe 1500 Pro Bar Corners and store them in a safe place for future use.

Next, remove the release liner from the narrow piece of tape on the top of each bar. Lift each edge of the canvas to wrap the bar. Apply pressure to secure it in place. Trim off the excess canvas from the edge of your frame by gently folding the print back down onto the work surface. Use the edge of the wooden bar as a guide to ensure you make a straight cut.

Fold up each of the corner tabs and apply pressure to secure them to the end of each bar. To create the edges of your finished canvas, lift the bars so that the corners meet. Insert the corner pin to hold the bars in place. Do this by using the ends of the pin to find the hole in the wooden bar and then apply pressure to pierce the canvas. Finish your frame by using the tensioning inserts. Simply align each insert with the grooves on the back of each bar, then apply pressure to secure in place.

How to Make a GOframe 1500 without Trimming

Transcript: Goframe system demonstration of how to wrap a canvas without having to trim to the edges of the print first. Though the print in the video has the image wrapped around the side, this is most useful when you want the edges to be blank.
Goframe system demonstration of how to wrap a canvas without having to trim to the edges of the print first. Though the print in the video has the image wrapped around the side, this is most useful when you want the edges to be blank.

Product Reviews

Write Your Own Review
You're reviewing:GOframe 1500 Accessories & Supplies
Your Rating

Frequent Asked Questions

Q
Do some fasteners come with the Go Frame bars when I buy those? They were in my last box but I want to be sure I don't need to buy some separate.
Asked by Gabrielle
A
Hello Gabrielle. Yes, the u-shaped fasteners are included with the GOframe 1500 bars. Extras are also available in the starter kit.
Answer by Binding101
Q
Do I have to use corner clamps?
Asked by Tom
A
Hi Tom. Yes, the corner clamps are required for assembling GOframe 1500 canvas stretchers. They are reusable and only used during assembly, so the 4-pack is popped on while you are making your frame, and off once you are done so you can use them to build the next frame.
Answer by Binding101

Submit a New Question