0 My Cart

There are no items in your shopping Cart.

Foil Roll Cutter


With the Therm-O-Type foil roll cutter you can stop wasting foil from your roll for smaller applications. Instead of using your full 24" wide roll, use this cutter to create a roll size of your desired width. The blade is completely adjustable, so there are no pre-sets to limit your abilities, and it will lock firmly into place for accuracy. It is simple to use; just put your roll on the bar, mark your cut, turn it on and cut through the foil. As the blade naturally dulls, it can be rotated to a new, sharp position. You can buy the foil roll cutter online today. It is compatible with our 24 x 500' foil rolls featuring 1" cores, but can handle any 1" core foil roll up to 1,000 feet long or  4 ½" in diameter. It is an ideal solution for businesses using foil fusing equipment for smaller sheets than the 24" roll, such as business cards, invitations , art prints and much more.

How to Use the Foil Roll Cutter:
① Place your foil roll onto the support shaft with the foil opening facing down, and away from you (toward the blade)
② Press the roll all the way onto the shaft, locking it in place onto the hinged blade
③ Measure and mark the foil to your desired width
④ Position and lock the blade assembly over your mark, then place the blade back into starting position with the blade cover on
⑤ Turn the foil cutter power switch on to spin the roll
⑥ Pull the handle through the spinning roll slowly to cut
⑦ After cutting, place the blade assembly back into the starting position with the blade cover on


Product Description


The Therm-O-Type Foil Cutter can handle rolls up to 1,000 feet in length and 4 ½" in diameter. Rolls of foil are slipped over a steel shaft with a soft aluminum cover. A locking mechanism grips the inside of the roll core. A large circular blade, mounted on a handle, can be positioned along a support shaft and secured in position for the correct cut off length. Starting the electric motor, simply lower the blade handle for an accurate and clean cut through the foil and supporting core. As the blade dulls, it can be rotated to a new, sharp position.


Manufacturer Therm-O-Type Corporation
Manufacturer Part Number FOILCUT
Operating Method Electric
Compatible Supplies Foil Rolls with 1" Core [24" x 500']
Power Voltage 110V
Dimensions 43" W x 13" D x 13" H
Manufacturer's Warranty 1 Year Limited Parts
Product Type Foil Roll Cutters
Maximum Roll Length 25.125" W x 1000' L
[4 ½" in Diameter]
Shipping Weight (lbs) 46
Product Weight (lbs) 40
Shipping Information Shipping Dimensions: 13" W x 44" D x 14" H

User Reviews

Downloads & Resources

You may also be interested in the following product(s)