The James Burn Lhermite® EX610DA Automatic Punching Machine is the only one that can operate with double action tools. Allowing for punching applications on both the leading and trailing edges of the paper. Double-Action means this machine has two dies, so you can punch different patterns at different points of the paper, all in one pass. The most common application is for Calendars that have wire on one end and a pinhole punched at the bottom. Instead of running the paper through twice or punching the wire pattern on one machine and drilling the hole in another machine offline, with the EX610DA you can punch both patterns at the same time in one-pass.
This machine is equipped with: a double action unit that accepts standard EX single action tools or EX tools with an EM head for double action application, a rear ejection device and a rear lay gauge. Double action tools are generally used to do applications with punching of Wire-O Spiral, Plastic Coil, Plastic Comb, or Filofax on the top edge and a corner perforation or round cornering on the back edge. This corner perforation or round cornering can be made with mobile blocks and blank blocks to maintain the sheets. The tab cutting is done with one set of knifes and counter-knifes adjustable according to the quantity of tabs. We will always require samples of tabs cuttings to confirm the feasibility of the work.
Features and Benefits:
|Item #||04JBEX610DA + 04JBEX610RECP|
|Manufacturer||James Burn International|
|Shipping Weight (lbs)||3.3|
|Power Voltage||2.5 Kw - 220/380 Volts - 3 phase|
|Speed||80 Cycles/ Minute|
|Machine Dimensions||9.2' x 3.4' x 4.6'|
|Sheet Size||Minimum Length: 4" - Maximum Length: 9.8"|
|Maximum Binding Edge||11" (Minimum: 5")|