Logan FoamWerks Replacement Blades for Circle Cutter (20pk) #WA-20
10.17
NewCondition
InStock
Logan FoamWerks Replacement Blades for Circle Cutter (20pk) #WA-20
SWIPE FOR MORE IMAGES
- 0
- 1
Overview
Looking for replacement Logan FoamWerks blades for your FoamWerks circle cutter WA8001? This pack of replacement blades, model WA-20, are perfectly compatible. OEM manufacturer-direct blades are top-quality and built to the highest standards.
Specifications
| Item # | 05AGLOWA20 |
|---|---|
| Brand Name | Logan Graphic Products, Inc |
| Manufacturer Part Number | WA-20 |
| For Use With | FoamWerks Circle Cutter #WA8001 |
Description
Looking for replacement Logan FoamWerks blades for your FoamWerks circle cutter WA8001? This pack of replacement blades, model WA-20, are perfectly compatible. OEM manufacturer-direct blades are top-quality and built to the highest standards.
Videos
FoamWerks WA-8001 Circle Cutter
Transcript:
Video: how to use the FoamWerks™ WA-8001 Circle Cutter to create perfectly cut out circles from foam and mounting boards.
Video: how to use the FoamWerks™ WA-8001 Circle Cutter to create perfectly cut out circles from foam and mounting boards.
FoamWerks WC-6010 Straight Bevel Cutter
Transcript:
Video: how to use the FoamWerks™ WC-6010 Straight/Bevel Cutter to create perfectly straight cuts and beveled angled cuts from foam and mounting boards.
Video: how to use the FoamWerks™ WC-6010 Straight/Bevel Cutter to create perfectly straight cuts and beveled angled cuts from foam and mounting boards.
FoamWerks WB-6020 Freestyle Cutter
Transcript:
Video: how to use the FoamWerks™ WB-6020 Freestyle Cutter, allowing for free movement and curves while you cut through foam and mounting boards.
Video: how to use the FoamWerks™ WB-6020 Freestyle Cutter, allowing for free movement and curves while you cut through foam and mounting boards.
Frequent Asked Questions
Q
Can the cutter be used to cut card stock approx .030 thick?
Asked by Jeff Ehrlich
A
Since this cutter is specifically designed for foam board, we cannot confirm 100%. But, given that your paper stock is thinner, we don't see a reason why it wouldn't work. Just make sure you have the proper cutting mat beneath to allow the blade to fully penetrate the sheet. https://www.binding101.com/cutters-trimmers/blades-accessories/self-healing-cutting-mats
Answer by Binding101
Q
will this cut corrugated plastic?
Asked by Gwen
A
These cutters are meant for foam core board, which tends to be quite a bit softer than corrugated plastic. Unfortunately, for that reason, we do not recommend these cutters for corrugated boards.
Answer by Binding101
Submit a New Question
