Pro-Lam PL244WF 44" Roll Laminator with Mobile Stand and 3" Mandre
Overview
The PL-244WF wide format 44" laminator will run all types of thermal laminating films up to 10 mil thick. It is capable of laminating at speeds up to 7 feet per minute and can mount boards up to a 3/16".
Specifications
Item # | 04PL244WF |
---|---|
Brand Name | Pro-Lam |
Manufacturer Part Number | 04PL244WF |
Speed Max Mechanical Speed | 7 fpm |
Maximum Sustained Lamination Speed | 1.2 Mil @ 230 degrees 7fpm / 3 Mil @250 Degrees 5 fpm |
Max Film Thickness | 10.0 Mil |
Max Substrate Thickness | 3/16" |
Cooling Fans | 4 @ 110 CFM ea. = 440 cubic feet per minute |
Warm Up Time | Less Than. 5 min. |
Max Film Roll Diameter | 11" with 1.5 mil & stand |
Gapable rolls | Yes-Front Heat and Rear Pull Rollers |
Temp Controls | Solid State - Digital Readout 2 degree hysteresis |
Motor / Speed Control | DC High Torque Gear Motor / Solid State Variable, Both Air Cooled |
Slitters | Optional |
Heated Roll Watts | 2400 ea 4800 combined, X BTU's |
Electrical Requirements | 240 Volt 60 Hz 21 Amps/2,800 Watts / Dedicated 30 Amp Circuit |
Dimensions | 55"W x 20"D 16"H -w/o stand 40"H-w/ stand |
Shipping Dimensions | 2 Packages Laminator 18" x 60" x 20" / Stand 23" x 33" x 8" |
Weight Laminator and Stand | 300 lbs |
Shipping Weight Laminator | 230# Stand 70# |
Description
The PL-244WF wide format 44" laminator will run all types of thermal laminating films up to 10 mil thick. It is capable of laminating at speeds up to 7 feet per minute and can mount boards up to a 3/16".
The PL 244WF has a warm up time of about 6 minutes, simply turn it on when you need it. It is well suited for applications using heat activated adhesive foam board and running thermal laminating to produce a mounted and laminated piece all done in just one pass. The silcone heated rollers provide superior scratch and stretch free finish. Designed for the ease of operation and superior finish of applications requiring 44" wide format lamination, this is an excellent laminating machine.
The standard PL-244WF includes a stand with casters, and 3" mandrels. Options are available such as|||additional mandrels with 1" or 3" cores, slitters and a release liner take up winder for using pressure sensitive films.
Features:
- 44" Wide Format Lamination
- Patented Rollers, Warm Up 6 min.
- Laminates all film grades ~10.0 mil
- Variable Speed Control, Reversible
- Laminates/Mounts Thru 3/16" Thick
- 12"dia.+ Film Roll Capacity
- Digital Temperature Read Out and Control
- Three Cooling Fans
- Ultra Duty Welded Steel Stand Standard
- 3" Mandrels Standard
Note: These units are rated for light to medium duty use and are not recommended for a large volume industrial setting. The use of this machine in that environment can result in damage to the rollers that will not be covered under the warrantee.