High Speed Steel Knife for Triumph 6550 EP

Availability: Usually ships the next business day
Regular price:$414.00
Quantity:  

Product Description

Replacing the knife on your Triumph 6550EP Electric Cutter is very important to ensure you are always getting a perfect cut, without straining and wearing down the machine. The power of the electric system will push even a dull blade through your stack, but when a dull blade is used the machine works much harder and will wear down quicker. An easy and fairly inexpensive way to keep your cutter performing at its peak for years to come is to frequently replace your knife.

High speed steel knives (HHS) are made of a bi-metallic composition consisting of one part 18% tungsten high speed steel and one part standard grade steel. A special fusion process bonds these two grades of steel together to produce an extremely wear-resistant knife. Offers a longer life than standard inlay knives. While not precise for every user and application, you can use this as a general rule of thumb: inlaid knifes offer 16 hours of use, or about 3,000 cycle runs before they need replacing*.

***Please note: Cutter manufacturers have been known to make changes to their cutters over time, while keeping the same model name and number. At times, the blade specifications can change. To make sure the blade listed is correct for your machine, compare the measurements listed on Binding101.com to the measurements of your current blade. If they are not exactly the same, please call us at (866)537-2244 and we will help determine what blade your machine requires.***
Specifications:

    Item Number05JYMBM42289
    Knife TypeHigh Speed Steel
    Knife Make-Up50% High Speed Steel (with 18% Tungsten)
    50% Standard Grade Steel
    Size29.724" L x 3.543" W x 0.393" D
    Compatible CuttersTriumph 6550EP Electric Cutter
    Quantity1 Knife

* General estimate calculated based on 50# bond paper. Can vary greatly depending on specific applications and materials being cut.

Replacing the knife on your Triumph 6550EP Electric Cutter is very important to ensure you are always getting a perfect cut, without straining and wearing down the machine. The power of the electric system will push even a dull blade through your stack, but when a dull blade is used the machine works much harder and will wear down quicker. An easy and fairly inexpensive way to keep your cutter performing at its peak for years to come is to frequently replace your knife.

High speed steel knives (HHS) are made of a bi-metallic composition consisting of one part 18% tungsten high speed steel and one part standard grade steel. A special fusion process bonds these two grades of steel together to produce an extremely wear-resistant knife. Offers a longer life than standard inlay knives. While not precise for every user and application, you can use this as a general rule of thumb: inlaid knifes offer 16 hours of use, or about 3,000 cycle runs before they need replacing*.

***Please note: Cutter manufacturers have been known to make changes to their cutters over time, while keeping the same model name and number. At times, the blade specifications can change. To make sure the blade listed is correct for your machine, compare the measurements listed on Binding101.com to the measurements of your current blade. If they are not exactly the same, please call us at (866)537-2244 and we will help determine what blade your machine requires.***
Specifications:

    Item Number05JYMBM42289
    Knife TypeHigh Speed Steel
    Knife Make-Up50% High Speed Steel (with 18% Tungsten)
    50% Standard Grade Steel
    Size29.724" L x 3.543" W x 0.393" D
    Compatible CuttersTriumph 6550EP Electric Cutter
    Quantity1 Knife

* General estimate calculated based on 50# bond paper. Can vary greatly depending on specific applications and materials being cut.

Follow Me on Pinterest
Follow Me on Twitter
Secure 128-bit Encrypted E-Commerce provided by Yahoo! Small Business
Pronto Top Seller - Office
Binding 101 is an Upfront Merchant on TheFind. Click for info.
What our customers are saying...