25" Ledco HD-25 Workhorse Industrial Laminator (Discontinued)
We're sorry, but we no longer sell this item.
- 0
- 1
- 2
- 3
Overview
The Ledco HD-25 is an industrial lamination machine that is known across printing industries as a dependable and reliable unit. It can laminate up to 25" wide and up to a 1/2" thick mounting board at speeds up to 25 feet per minute. This versatile thermal laminator is easy to use and has an adjustable temperature range of 100° - 400° F, so you can handle print materials of all kinds. Attached to the machine are retractable edge slitters that can trim as the laminate exits the machine, so you don't have to spend time hand trimming. Buy the Ledco HD-25 Workhorse 25" industrial laminator online today; it absorbs tremendous usage with amazing durability, produces the highest quality lamination, every time, and is backed by a two year manufacturer's warranty. It works with any thermal laminating film up to 25" wide.
Specifications
Item # | 0425INDUST |
---|---|
Manufacturer | LEDCO Inc. |
Manufacturer Part Number | 70112L2300 |
Included Supplies & Accessories | Stand Upper Fan Assembly Extensions to Accommodate a 12" OD Roll of Film |
Power Voltage | 220V |
Speed | 25 Feet / Minute [Adjustable] |
Dimensions | 36" L x 21" D x 30" H |
Manufacturer's Warranty | 2 Year Limited Defective |
Size | 25" |
Product Type | Laminating Machines, Laminating & Mounting Machines |
Warm-Up Time | 30 Minutes |
Maximum Mil Thickness | 10 Mil |
Temperature Range | 100° - 400° F [Adjustable ] |
Maximum Width | 25" |
Core Size | 3" Core |
Maximum Thickness | 1/2" Mount Board |
Integrated Cutter | Retractable Slitters |
Shipping Weight (lbs) | 560 |
Shipping Information | This item ships via Truck (Common Carrier). It is the responsibility of the Consignee (receiver) to remove the product from the truck. If you do not have a loading dock or any other means to lift the freight off the truck and/or you need assistance bringing the product inside of your location please call (866) 537-2244. Click here for full details. |
Description
The Ledco Workhorse Laminator is an ideal machine for the owners of inkjet printers and other digital imaging devices, because it will mount or mount and laminate in a single pass on boards up to 1/2" thick. It will handle different materials without setup changes, run polypropylene film, laminate one-sided, and do cold lamination by adding the release liner take-up. Contact us for more details about this option.
Features:
-
Intelligent heat controllers anticipate the heat demand for each job to maintain a set temperature
-
Variable-speed operation for proper lamination of thicker films at slower speeds
-
Removable heat shoes are easily unplugged and removed to clean or replace the laminating rollers
-
Upper and lower rollers are driven to minimize material wrinkling or curling
-
Pull rolls can be used as laminating rolls if the laminating rolls become damaged
-
Pressure release control makes it easier to clear film and allows the rollers to turn during warm-up
-
Retractable slitters remove the side scrap from both sides of each sheet as it moves through the laminator
-
18" extension bars
-
Upper fan assembly provides additional cooling to run thicker films at higher speeds